BURKERT000626950124A 4.0 solenoid valve*

BURKERT000626950124A 4.0 solenoid valve*
Our company has established a branch in Bremen, Germany, specializing in one-stop procurement services for imported accessories from Europe. Our products are of high quality and affordable. Thank you!
*Agents for BURKERT solenoid valves, BURKERT angle seat valves, BURKERT transmitters, BURKERT process control valves, BURKERT pneumatic actuators, BURKERT sensors, BURKERT cylinders, BURKERT flow meters, and BURKERT hydraulic valves.
BURKERT agent, BURKERT stock, BURKERT manufacturer, BURKERT inventory, BURKERT office, BURKERT*，BURKERT warehouse
Two position two-way) normally closed type
Media: water, air, oil, natural gas, hot water, etc
Fluid temperature: -5 ℃ to 180 ℃
Work pressure: 0.0~1.6Mpa
Valve body material: brass or stainless steel
Connection size: 1/8 "to 1"
Diameter (mm): DN6-25
Sealing materials: NBR, EPDM, VITON
Voltage tolerance: ± 10%, DC voltage tolerance: ± 1%
Voltage AC/DC, can be customized according to customer needs.
Precautions for using and installing BURKERT solenoid valve:
1. Before installation, impurities in the pipeline must be cleaned thoroughly.
2. To extend the service life, a Y-shaped filter should be installed at the front end of the solenoid valve.
3. When selling and installing, it is necessary to confirm the fluid used.
4. When selling and installing, it is necessary to confirm the voltage used on site.
5. When selling and installing, it is necessary to confirm the pressure of on-site use.
6. When selling and installing, it is necessary to confirm the temperature of the fluid used.
7. Please refer to the correct installation pipe usage diagram.
BURKERT000626950124A 4.0 solenoid valve*
Baode solenoid valve piping instructions:
This product is not suitable for vertical piping with inverted piping. Horizontal piping is required to avoid unsmooth movement and mechanical problems.
Baode Burkert solenoid valve malfunction and troubleshooting
1、 Electromagnetic does not work after being powered on
1. Check for poor power wiring - rewiring and connector connections
2. Check if the power supply voltage is within ± working range - adjust to the normal position range
3. Is the coil desoldered - re soldered
4. Coil short circuit - replace coil
5. Is the working pressure difference inappropriate - adjust the pressure difference - or replace the corresponding solenoid valve
6. High fluid temperature - replace the corresponding solenoid valve
7. Impurities cause the main valve core and moving iron core of the solenoid valve to get stuck - clean them. If there are damaged seals, replace them and install a filter
8. The liquid viscosity is too high, the frequency is too high, and the lifespan has expired - replace the product
2、 The solenoid valve cannot be closed
1. The seal of the main valve core or iron moving core is damaged - replace the seal
2. Is the fluid temperature and viscosity too high? Replace the sealed solenoid valve
3. Impurities enter the auxiliary valve core or moving iron core of the solenoid valve - clean it
4. Spring life has expired or deformed - replace
5. Throttle balance hole blockage - clean in time
6. Working frequency too high or lifespan has expired - choose or replace product
III
other circumstances
1. Internal leakage - check for damaged seals and poor assembly of springs
2. Leakage - Loose connections or damaged seals - Tighten screws or replace seals
3. There is noise when powered on - the head fastener is loose and tightened. The voltage fluctuation is not within the allowable range, adjust the voltage accordingly.
4. If there are impurities or unevenness on the suction surface of the iron core, clean or replace it in a timely manner.
Burkert, a German company, attaches great importance to technological innovation and new product development in its long-term development process. Through targeted product design, modernization and processing technology, strict and meticulous quality inspection, and practical market forecasting, six series of products have been formed, mainly consisting of "universal solenoid valve system", "process control valve system", "pneumatic control valve system", "liquid analysis valve system", as well as "sensors/transmitters" and "controllers".
Based on the exquisite design, performance, and excellent service of "Burkert" products, they have always held a position in the field of fluid control. The epoxy resin encapsulated coils and cable connectors produced by Burkert have become ISO quality standards. Burkert's inventions of the "pilot armature electromagnetic system," "rocker arm solenoid valve," and "pulse coil" are examples of the company's continuous innovation and development.
*