BMT965ST high concentration ozone gas analyzer

BMT965ST has decades of experience in ozone photometers and their industrial applications.

The superior stability of the photometer is achieved through the use of a true dual beam optical system and an extremely long-lasting mercury lamp. The MTBF of the instrument, including the lamp, exceeds 65000 hours. Excluding the lamp, it has 120000 hours.

It includes an 8GB non-volatile log storage, providing almost unlimited storage capacity for concentration logs and error logs. If connected to a PC, the instrument acts as an external USB drive from which concentration and error logs can be downloaded. Logs can also be copied, firmware can be upgraded, there is no external computer, only a USB flash drive needs to be connected.

Fully control all operating parameters and provide a link to Windows software BMT965. The power supply should be 100-240VAC or 12-36VDC as required. As an option, the instrument can be equipped with an internal purification unit (IPU) (solenoid valve and air pump) for fully automatic zero point.

The ozone analyzer BMT 965 is a panel mounted instrument according to DIN IEC 61554. The cut on the front panel should be 139 x 67 mm. The instrument is fixed in place by two clips.

The accessories for import and export pipes, as well as the connectors for power, signal, and RS-232 interfaces, are all located on the rear panel. Therefore, the total depth is approximately 250 millimeters.