BINDER FP720 drying oven

NegotiableUpdate on 01/09

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

BINDER FP720 drying oven

Product Details

BINDER FP720 drying oven

1、 Product Introduction:

1. Temperature range: ambient temperature plus 5 ℃ to 300 ℃

2 APT.line ™ Preheating chamber technology

3. Adjustable fan speed

4. Adjustable exhaust valve

5. Controller using interval programming and real-time programming

6. 2 chrome plated sockets

7. Independent adjustable temperature safety device level 2 (DIN 12880) with optical alarm

8. Computer interface: RS 422

2、 Technical parameters:

Product Model	FP720-400V1	FP720UL-208V¹
Choose a model	standard	standard
Item code	9010-0267	9010-0268
measurement
Internal volume [L]	720	720
Net weight of equipment (unloaded) [kg]	194	194
Maximum total load [kg]	120	120
Maximum load per partition [kg]	45	45
The dimensions of the casing do not include additional components and connectors
Net weight width [mm]	1235	1235
Net weight at height [mm]	1530	1530
Depth net weight [mm]	865	865
Wall distance from rear [mm]	160	160
Wall to side distance [mm]	100	100
internal dimensions
Width [mm]	1000	1000
Height [mm]	1200	1200
Depth [mm]	610	610
Data related to the environment
Energy consumption at 150 ℃ [Wh/h]	1320	1320
firmware
Number of partitions (hours/maximum)	2/16	2/16
Temperature performance data
The temperature range exceeds the indoor temperature by 5 ℃ to [℃]	300	300
Temperature deviation is 150 ℃ [± K]	2	2
Temperature fluctuation at 150 ℃ [± K]	0.3	0.3
Heating time to 150 ℃ [min]	39	39
The recovery time after opening the door in 30 seconds is 150 ℃ [min]	20	20
Ventilation data
Air exchange rate at 150 ℃ [x/h]	12	12
Electrical data
Rated voltage [V]	400	208
Power frequency [Hz]	50/60	60
Rated power [kW]	5	5
Equipment safety device [A]	3 x 16	3 x 16
Phase (rated voltage)	3～	3～

1. All technical data is only applicable to standard specifications of unloaded equipment at an ambient temperature of 22 ± 3 ℃ and a power supply voltage fluctuation of ± 10%. Determine temperature data according to BINDER factory standards and DIN 12880:2007, and adapt to the recommended wall gap of 10% of the internal chamber height, width, and depth. For series devices, all data are typical averages. The technical data assumes a fan speed of 100%. We reserve the right to make technical changes.