BINDER FD260 drying oven

NegotiableUpdate on 01/09

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

BINDER FD260 drying oven

Product Details

BINDER FD260 drying oven

1、 Product Introduction:

1. Temperature range: ambient temperature plus 10 ℃ to 300 ℃

2. Up to 30% more energy-efficient than common devices on the market

3. Utilizing APT.line ™ Technology achieves high temperature accuracy

4. Circulating air

5. Controller with LCD display

6. Exhaust valve electromechanical control

7. 2 chrome plated sockets

8. Integrated independently adjustable temperature safety device level 2 (DIN 12880) with optical alarm

9. Ergonomic handle design

10. USB interface for recording data

2、 Technical parameters:

PRODUCT MODEL	FD260-230V¹	FD260UL-240V¹
Choose a model	standard	standard
Item code	9010-0309	9010-0310
measure
Internal volume [L]	259	259
Net weight of equipment (unloaded) [kg]	85	85
Maximum total load [kg]	270	270
Maximum load per partition [kg]	40	40
The dimensions of the casing do not include additional components and connectors
Net weight width [mm]	810	810
Net weight at height [mm]	965	965
Depth net weight [mm]	760	760
Wall distance from rear [mm]	160	160
Wall to side distance [mm]	100	100
Internal dimensions
Width [mm]	650	650
Height [mm]	780	780
Depth [mm]	515	515
The number of doors
Outer door	1	1
Data related to the environment
Energy consumption at 150 ℃ [Wh/h]	410	410
Sound pressure level [dB (A)]	43	43
firmware
Number of partitions (hours/maximum)	2/8	2/8
Temperature performance data
The temperature range exceeds the indoor temperature by 10 ℃ to [℃]	300	300
Temperature deviation is 150 ℃ [± K]	1.9	1.9
Temperature fluctuation at 150 ℃ [± K]	0.4	0.4
Heating time to 150 ℃ [min]	19	19
The recovery time after opening the door in 30 seconds is 150 ℃ [min]	5	5
Electric data
Rated voltage [V]	230	240
Power frequency [Hz]	50/60	60
Rated power [kW]	2.3	2.5
Equipment safety device [A]	12.5	16
Phase (rated voltage)	1～	1～

1. All technical data is only applicable to standard specifications of unloaded equipment at an ambient temperature of 22 ± 3 ℃ and a power supply voltage fluctuation of ± 10%. Determine temperature data according to BINDER factory standards and DIN 12880:2007, and adapt to the recommended wall gap of 10% of the internal chamber height, width, and depth. For series devices, all data are typical averages. The technical data assumes a fan speed of 100%. We reserve the right to make technical changes.