BINDER E28 drying oven

NegotiableUpdate on 01/09

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

BINDER E28 drying oven

Product Details

BINDER E28 drying oven

1、 Product Introduction:

1. Temperature range: 60 ℃ to 230 ℃

2. Adjustable exhaust valve

3. Hydraulic mechanical temperature controller

4. Temperature safety device level 1 (model: E028-230V-T)

5. Timer 0-120 min

6. 2 chrome plated sockets

2、 Technical parameters:

PRODUCT MODEL	E028-230V¹	E028-230V-T¹	E028-120V¹
Purchase model	standard	Equipped with TB (mechanical temperature limit protection device) level 1	standard
Item code	9010-0001	9010-0003	9010-0106
measure
Internal volume [L]	28	28	28
Net weight of equipment (unloaded) [kg]	22	22	22
Maximum total load [kg]	25	25	25
Maximum load per partition [kg]	10	10	10
The dimensions of the casing do not include additional components and connectors
Net weight width [mm]	580	580	580
Net weight at height [mm]	405	405	405
Depth net weight [mm]	425	425	425
Wall to side distance [mm]	100	100	100
Wall distance from rear [mm]	160	160	160
Internal dimensions
Width [mm]	400	400	400
Height [mm]	280	280	280
Depth [mm]	250	250	250
The number of doors
Outer door	1	1	1
firmware
Number of partitions (hours/maximum)	2/4	2/4	2/4
Temperature performance data
Temperature range [℃]	60…230	60…230	60…230
Heating time to 150 ℃ [min]	36	36	36
The recovery time after opening the door in 30 seconds is 150 ℃ [min]	19	19	19
Electric data
Rated voltage [V]	230	230	120
Power frequency [Hz]	50/60	50/60	60
Rated power [kW]	0.8	0.8	0.8
Phase (rated voltage)	1～	1～	1～

1. All technical data is only applicable to standard specifications of unloaded equipment at an ambient temperature of 22 ± 3 ℃ and a power supply voltage fluctuation of ± 10%. Determine temperature data according to BINDER factory standards and DIN 12880:2007, and adapt to the recommended wall gap of 10% of the internal chamber height, width, and depth. For series devices, all data are typical averages. We reserve the right to make technical changes.