BINDER BD23 Biochemical Incubator

NegotiableUpdate on 01/09

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

BINDER BD23 Biochemical Incubator

Product Details

BINDER BD23 Biochemical Incubator

1、 Product Introduction:

1. Temperature range: ambient temperature plus 5 ℃ to 100 ℃

2 APT.line ™ Preheating chamber technology

3. Free convection

4. Adjustable exhaust valve

5. Controller with time function

6. Interior door made of safety glass (ESG)

7. 2 chrome plated sockets

8. Stackable

9. Independent adjustable temperature safety device, Class 3.1 (DIN 12880), equipped with optical temperature alarm

10. Computer interface: RS 422

2、 Technical parameters:

Product Model	BD023-230V¹	BD023UL-120V¹
Choose a model	standard	standard
Item code	9010-0187	9010-0189
measurement
Internal volume [L]	20	20
Net weight of equipment (unloaded) [kg]	27	27
Maximum total load [kg]	25	25
Maximum load per partition [kg]	12	12
The dimensions of the casing do not include additional components and connectors
Net weight width [mm]	435	435
Net weight at height [mm]	495	495
Depth net weight [mm]	520	520
Wall distance from rear [mm]	160	160
Wall to side distance [mm]	100	100
internal dimensions
Width [mm]	222	222
Height [mm]	330	330
Depth [mm]	277	277
number of doors
outer gate	1	1
Data related to the environment
Energy consumption at 37 ℃ [Wh/h]	11	11
firmware
Number of partitions (hours/maximum)	2/4	2/4
Temperature performance data
The temperature range exceeds the indoor temperature by 5 ℃ to [℃]	100	100
The temperature deviation is 37 ℃ [± K]	0.5	0.5
Temperature fluctuation at 37 ℃ [± K]	0.2	0.2
Heating time to 37 ℃ [min]	59	59
The recovery time after opening the door in 30 seconds is 37 ℃ [min]	20	20
Electrical data
Rated voltage [V]	230	120
Power frequency [Hz]	50/60	60
Rated power [kW]	0.2	0.2
Equipment safety device [A]	12.5	12.5
Phase (rated voltage)	1～	1～

1. All technical data is only applicable to standard specifications of unloaded equipment at an ambient temperature of 22 ± 3 ℃ and a power supply voltage fluctuation of ± 10%. Determine temperature data according to BINDER factory standards and DIN 12880:2007, and adapt to the recommended wall gap of 10% of the internal chamber height, width, and depth. For series devices, all data are typical averages. We reserve the right to make technical changes.