BHD-500 film negative drying oven automatic constant temperature radiographic testing

NegotiableUpdate on 05/07

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

BHD-500 type far-infrared automatic constant temperature film drying oven I. Introduction DG-200C type far-infrared automatic constant temperature film drying oven is a new product launched by our company for non-destructive testing and medical unit services. The oven is manufactured based on advanced experience of similar products at home and abroad. The drying oven is a vertical structure with transparent glass on the top. The box body is made of high-quality thin steel plate, and the components are all treated with electroplating and anti-corrosion for durability. Compared with the electric heating wire used in other drying ovens, this box adopts far-infrared heating, which has the advantages of fast heating, long constant temperature time, low power consumption, reliable insulation performance, and safe use

Product Details

2、 Specifications: Operating voltage: 220V AC 50HZ Operating temperature: adjustable from 20 to 99 ℃ (drying film temperature should not exceed 60 ℃) Heater power: 2000W Studio size: 700 × 350 × 550 (mm) External dimensions: 700 × 430 × 930 (length × width × height) Weight: 35Kg 3. Usage: 1. Turn on the panel switch, the temperature rise indicator light is on, the air supply motor is running, and the temperature gradually rises. When the temperature reaches the given value, the temperature rise indicator light is off and the constant temperature indicator light is on. The air supply motor runs as usual. When the temperature drops below the set value by 5 ℃, the temperature rise indicator light will turn on. This cycle indicates that the temperature control is normal. 2. Connect the power supply, and the grounding pin in the three core power plug must be well grounded. 3. The box is equipped with a slot frame for placing the washing clip, which is suitable for non-destructive testing universal washing clip placement. If a large washing clip or medical washing clip is placed, the slot frame can be removed. 4. Drip off the cleaned film clamped on the developing clip, then place it on the groove rack in the studio and close the box cover. 5. After use, turn off the panel switch, cut off the power or unplug the plug. 6. The cross-sectional area of the power cord should not be less than 1.5 square millimeters. 4、 Note 1: When placing and removing the film, the power switch must be turned off. 2. The drying oven should be placed in a dry and ventilated area. 3. The box should be well grounded during use to avoid electric shock accidents.