Automatic vortex mixer

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The ZH-3 automatic vortex mixer is an upgraded product of traditional mixers. Handheld free design, equipped with multiple specifications of sockets, suitable for test tubes and ampoules of different diameters. With exquisite design, strong functionality, and easy use, it can be widely used in biological, chemical, medical, hygiene, industrial and mining enterprises, and scientific research institutions for powder and liquid mixing. It is an ideal conventional experimental instrument. Especially when conducting bacterial endotoxin testing.

Product Details

Automatic vortex mixer

1、 Instrument Introduction

Automatic vortex mixer is an upgraded product of traditional mixer. Handheld free design, equipped with multiple specifications of sockets, suitable for test tubes and ampoules of different diameters. With exquisite design, strong functionality, and easy use, it can be widely used in biological, chemical, medical, hygiene, industrial and mining enterprises, and scientific research institutions for powder and liquid mixing. Especially when conducting bacterial endotoxin testing. This instrument is an ideal conventional experimental device.

2、 Main features

1. Specially designed high-quality test tube insertion tray, allowing for direct insertion of test tubes of different diameters without the need for

Handheld manually, especially suitable for long-term mixing situations.

2. The instrument is equipped with a timer, which automatically shuts down when the working time is set.

3. The mixing speed can be adjusted, suitable for mixing samples of different capacities.

4. The instrument chassis is weighted and adopts high-quality suction cup bottom corners, ensuring stable and reliable operation.

3、 Technical parameters

power supply	220V50Hz
power	25W
rotation speed	0～3000rpm(Adjustable)
timing	1～60Minutes (adjustable)
Test tube diameter	10～17mm

4、 Usage method

1. Use a damp cotton cloth to clean the bottom corners of the four suction cups on the workbench and instrument

Place the instrument in place and apply pressure to ensure that the suction cup at the bottom corner of the instrument is in contact with the workbench

Tighten up.

2. Wipe the lower part of the test tube with a damp cloth and insert it into a suitable hole (with a certain gripping force). Note that the test tube must be perpendicular to the insertion plate, otherwise there will be liquid splashing during operation.

3. After connecting the power cord, select the timer time as needed (the shorter time setting should be turned over first, and then adjusted back).

4. Rotate the speed control knob clockwise, observe the mixing of the sample after the instrument is working, and gradually adjust to the appropriate speed. To prevent samples from flying out of the test tube, it is advisable to fill the solution with no more than one-third of the height of the test tube.