Automatic sample embedding machine

The automatic sample embedding machine is used to embed samples with shapes or sizes that are not suitable in order to meet the subsequent sample preparation steps and obtain the required detection plane; Or to protect the edges or prevent surface defects caused by the preparation process. In modern metallographic laboratories, semi-automatic or automatic grinding is widely used/Polishing machines have specific requirements for sample size, and in order to meet these requirements, it is necessary to embed the samples. Therefore, embedding machines have become one of the essential equipment in metallographic laboratories.

　Automatic sample embedding machineIt belongs to the fully automatic metallographic specimen embedding machine, with the function of inlet and outlet water cooling, suitable for hot embedding of all materials (thermosetting and thermoplastic). After setting the embedding parameters such as heating temperature, insulation time, and force, the specimen and embedding material are placed, covered with a lid, and the work button is pressed to automatically complete the embedding work without the need for operators to be on duty at the machine. Can be replaced according to different sample requirements4A mold of different specifications can also simultaneously press two samples, doubling the preparation capacity.

technical parameter

1Mold specifications: φ25mm φ30mm φ40mm φ50mm

2Power supply:220V 50HZ