- Phone
-
Address
No. 921, Beixing Industrial Park, Xiangcheng District, Zhangzhou City, Fujian Province
Product Categories
Zhangzhou Jiazhuo Automation Equipment Co., Ltd
Automatic moisture regulation system
NegotiableUpdate on 05/07
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The moisture automatic adjustment system is an online non-contact material moisture detector installed on the production line site, used as a near-infrared moisture instrument equipment for online detection of material moisture. This product is suitable for multiple industries such as metallurgy, coal, chemical, synthetic fiber, fiberboard, straw, papermaking, tobacco, food, medicinal materials, construction, etc. It can quickly measure the moisture value at various process points on the production line, reduce manual sampling and testing, facilitate real-time collection and analysis of moisture data, and provide guidance for production work.
Product Details
The development of agriculture has led to an increasing amount of water used in agriculture. However, China's water resources are severely lacking, and traditional agricultural irrigation methods have low water utilization rates, resulting in a significant waste of water resources. Therefore, the development of water-saving irrigation is urgently needed. This article proposes a design scheme for a water-saving irrigation automatic control system, which has a relatively small investment and can achieve agricultural irrigation automation to a certain extent while utilizing water resources.
JZ-41Automatic moisture regulation system， JZ-41 is a software/hardware upgrade based on 31; Software increases non-linear supplementation, stable filtering, and adds distributed I/O communication methods; Change the storage of ordinary EEPROM to ferroelectric memory FRAM in hardware; The ordinary non integrated isolated 485 interface chip is a Siemens RS485 interface chip; Change the interface method between the host and the probe; Eliminate faults caused by software and hardware failures, poor external contact, and vulnerability; 41 is a type suitable for measuring on-site functional requirements and high reliability requirementsAutomatic moisture regulation system
Feature:
1.0-inch digital tube LED
Equipped with fault diagnosis and prompts
Technical Indicators:
Measurement range: 0-99%
Resolution: 0.01%
Measurement accuracy: ± 0.1% -0.2% (depending on material characteristics and application environment)
1. Measurement channel: 50
2. Test distance: 250mm ± 100mm (customizable)
3. Environmental temperature: -30 to 50 ℃ (special cooling structure is required if exceeded)
4. Environmental humidity: 5-90%
5. Repeatability: 0.1%
6. Response time: 0-60 seconds
7. Filter range: 0-2.5%
8. Power supply: 220V 50HZ/DC24V
9. Power consumption: 100W
10. Light interference: not affected by external environmental light changes, the probe does not require a light shield
11. Temperature influence: It has automatic temperature compensation and is basically not affected by external temperature changes
12. Communication output: RS485, RS232, 4-20mA, 0-10V, Profibus DP, Profinet, Ethernet TCP/IP, switch output (supporting MODBUS RTU and MODBUS TCP slave)
