Automatic UV spectrophotometer for detecting petroleum content in water

The TBD5-WQA4812 series fully automatic UV spectrophotometer is suitable for the determination of petroleum content in surface water, groundwater, and seawater. Widely used in environmental monitoring systems, petrochemicals, hydrology and water conservancy, tap water, sewage treatment plants, thermal power plants, steel enterprises, scientific research and teaching in universities, and agricultural environmental monitoring. This instrument complies with the latest national environmental protection standard "HJ970-2018 Determination of Petroleum in Water Quality by UV spectrophotometry".

TBD5-WQA4812 series automatic UV spectrophotometer for detecting petroleum content in water. Features:

Long lifespan, high selectivity, no maintenance required

Direct sampling, simple installation, compact structure

Rapid response to industrial design and advanced testing technology

Automatic cleaning, automatic zeroing

The LLA 4812 online monitoring instrument for oil in water is a professional liquid analyzer designed based on the principle of laser photometry. In general, it can meet the requirements of high-resolution analysis of liquid components. Identify liquid types and test concentration ranges through photometric absorption analysis.

The WQA4812-OCA online monitoring instrument for oil in water utilizes the absorption peak of petroleum mineral oil in the ultraviolet region to directly test the oil concentration using photometry. In the case of relatively single water pollutants, water samples can be directly tested. When the pollution is complex, standard extraction and separation methods still need to be used for sample pretreatment.

Application of fully automatic UV spectrophotometer oil analyzer:

Continuous monitoring of oil content in water.

Application of Water Oil Monitoring Instrument:

Industrial production process heat exchanger water oil online analyzer for oil leakage monitoring

Online Oil Detection Device for Environmental Water Quality in Petroleum Enterprises

Oil related wastewater treatment/wastewater discharge oil online monitoring instrument

Instrument functions

Can be equipped with automatic cleaning control;

Sample pressure, temperature automatic detection compensation

Automatic compensation for suspended solids testing

instrument performance

Display resolution: 0.01;

Heat up time:<2mins

Test response:<100ms

Output signal: 0/4-20mA

Switch output: Supports 8 channels (driven and adapted by specialized accessories)

Technical parameters of fully automatic UV spectrophotometer oil analyzer:

Instrument dynamic ratio: 1000:1; Can be enhanced to 10000:1 or above;

Repetition accuracy: 1% reading

Work pressure: 0-3kgf/cm2, up to 10kgf/cm2, exceeding 10kgf/cm2 requires specialized design;

Working temperature: T/F: 5 to 40 ° C; maximum up to 60 ° C;

D: 5 to 40°C;

Maintenance cycle: According to the system's automatic prompts, if necessary, over clean the filter

Annual zero drift:<2% measurement range

Protection level: IP56 (air valves and other devices must be placed in a safe place or specially designed with corresponding safety standards)

Power supply: 24V DC;

Power consumption:<10W (excluding actuator);