Atmospheric plasma cleaning machine

NegotiableUpdate on 07/10

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The JWD-2000ZP atmospheric plasma cleaning machine adopts a highly stable phase-shifting full bridge soft switching circuit and has a stable analog communication data transmission method, which can achieve unified monitoring by the central control system, making the cleaning effect more stable and durable, enhancing anti-interference performance, reducing failure rate, controlling maintenance costs, improving production capacity, and effectively reducing production costs.

Product Details

1、 Product Introduction:

JWD-2000ZPAtmospheric plasma cleaning machineThat shouldAtmospheric plasma cleaning machinePlasma cleaner is a domestically developed atmospheric plasma cleaning machine that uses a highly stable phase-shifting full bridge soft switching circuit and a stable analog communication data transmission method. It can achieve unified monitoring by the central control system, making the cleaning effect more stable and durable, enhancing anti-interference performance, reducing failure rates, controlling maintenance costs, increasing production capacity, and effectively reducing production costs.

大气等离子清洗机

2、 Principle Introduction

By applying an electric field to the process gas, it ionizes into plasma. The "active" components of plasma include ions, electrons, atoms, free active groups, excited state nuclides (metastable states), photons, etc. Plasma treatment is the process of utilizing the properties of these active components for physical and chemical reactions such as oxidation, reduction, cracking, cross-linking, and polymerization to alter the surface properties of samples, thereby optimizing material surface properties and achieving cleaning, modification, etching, and other purposes.

3、 Instrument construction

大气等离子清洗机

Structure of atmospheric plasma cleaning machine: composed of a high-voltage power generator and a plasma generating device spray gun.

4、 Instrument parameters

JWD-2000 power specification parameters
serial number	Category	parameter	Remark
1	input power	Single phase 220V/AC50/60Hz、10A	Ground wire ＜ 4 Ω
2	Input gas source	CDA/N2 (0.3-0.6Mpa) inlet pipe diameter: Φ 8	Oil free and water free
3	output power	300-1300 W	Determine based on the use of a spray gun
4	output accuracy	±5%	The current power value determines
5	power factor	≥50%	The higher the power factor, the higher the power efficiency
6	Output gas pressure	80-300Kpa	According to the settings for using the spray gun
7	operating frequency	20KHz-35KHz	According to the settings for using the spray gun
8	working method	Constant pulse width	Analog Control
9	external interface	PLC-IO	Please refer to the instruction manual for detailed function introduction
10	Communication line length	200±5mm	Optional welding free joint
11	Start stop interval time	Start: 3S, Close: 3S	Short interval time will reduce equipment stability
12	Equipment Utilization Rate	Continuous operation of over 95%	The utilization rate represents the stability of the equipment
13	Working environment temperature	-20 ~ 35℃	Nothing
14	Dimensions (mm)	L457xW395xH159mm	Please refer to the appearance dimension diagram for details
15	Power weight	15KG	Nothing
16	Configure space	Good ventilation, leaving over 200mm of heat dissipation space on both sides and 200mm of wiring space behind
17	Interference precautions	Please separate the plasma power supply from the PC power supply Plasma equipment (power supply, gun head, high-voltage cables) should be separated from the PC host and screen by at least 20cm ※ It is necessary to connect an independent grounding (cable with an area of 4mm ² or more)
18	detection function	Equipped with air pressure detection and rotation detection (rotating spray)Gun JuBackup), motherboard temperature detection function
19	protection function	Equipped with protection against low and high air pressure, as well as protection against low rotational speed

Spray gun accessories

大气等离子清洗机

5、 Product advantages

大气等离子清洗机

6、 Application Fields

大气等离子清洗机

7、 Specification requirements

Factory requirements
Power requirements	Single phase AC220V, 50/60Hz, 10A
Grounding requirements	The power box needs to be connected to the grounding wire of the machine platform (Ground wire thickness of 4mm or more, grounding resistance<0.6 Ω, the machine needs to reserve a separate ground wire interface)
Gas source requirements	Tracheal requirement: PU trachea 8mm Gas requirements: CDA/N2, pressure 0.3-0.6Mpa, Solid particle size<=0.1um, oil content<=0.01mg/m ³, pressure dew point below -40 ° C
Exhaust pipe	Flow rate: 5m ³/min, the material of the gas discharge pipeline needs to be corrosion-resistant

8、 Enterprise strength

大气等离子清洗机

9、 Transaction customer

Dedicated to providing users with professional surface treatment and testing solutions as a whole