Asphalt mixture rutting forming machine

Asphalt mixture rutting forming machineIt is mainly used for rolling and shaping asphalt mixtures during rutting tests, and is also suitable for making rolling method specimens for other physical and mechanical performance tests of asphalt mixtures. The machine and testing method comply with the requirements of JTG3410-2025 standard.

Technical specifications

1. Working voltage: 380V three-phase four wire.

2. Trial mold specification: 300x300X50mm.

The travel distance of the test car is 300mm.

The height variation value of the trial mold is 50~150mm.

5. The pressure of the grinding wheel is within 0-20KN and can be adjusted arbitrarily.

6. The radius of the grinding wheel is 500mm, the length is 510mm, and the width is 300mm.

7. Preheating for tile grinding at 20-200 ℃, which can be set arbitrarily (usually set to 100 ℃).

The pressure for rolling the wheel line is 300N/cm.

The asphalt mixture rutting tester is produced by our company using the JTG 3410-2025 new standard technology. It has greatly improved the safety and simplicity of operation, durability, noise control, heat dissipation, and energy control of the instrument compared to similar instruments, and meets the industry standard of JTG 3410-2025 of the People's Republic of China.

Technical specifications

1. Displacement detection range: 0-50 mm.

2. Deformation detection resolution: 0.01mm.

3. Deformation detection accuracy: ± 0.05mm.

4. Temperature control range: room temperature~80 ℃.

5. Temperature detection resolution: 0.1 ℃.

6. Temperature control accuracy: ± 0.5 ℃.

7. Test wheel grounding pressure: 0.7MPa ± 0.05MPa.

8. Walking frequency: 42 times/min ± 1 time/min.

9. Trial mold thickness: 50~150mm.