Asphalt mixture penetration tester in stock supply

Asphalt mixture penetration tester in stock supply

This instrument is used to test the penetration of asphalt mixture. It is mainly used to conduct penetration tests on asphalt mixture used for bridge paving, in order to determine its temperature and load at a certain temperature

Deformation under load capacity. Penetration tests can be conducted on a single specimen, or parallel penetration tests can be conducted on two specimens simultaneously, and the heating of circulating water can be set

Temperature, penetration depth automatic recording prefix='o'ns='rurn: schemas Microsoft com: office: office '

Technical parameters:

1. Weight of weight:

10kg~50kg

2. Penetrating rod cross-sectional area: 5cm

3. Penetration rod diameter

2.52cm

4. Weight of penetration rod

2.5kg

5. Displacement measurement range: 0-10mm

6. Resolution:

0.01mm

7. Temperature control range: room temperature~60 ℃

8. Accuracy: 0.1 ℃

9. Time measurement range and accuracy: 0-60min ± 1S.

10. Environmental temperature: ≤ 30 ℃.

Relative humidity: ≤ 85%.

12. Power supply voltage: 220V

Dual functional characteristics:

1. The computer display screen shows the displacement and time relationship curve.

2. And automatically judge the test results.

3. Automatically control the entire experimental process,

4. It has segmented sampling function. Sampling rate: Within the first 10 seconds of loading, the sampling rate shall not be less than 100Hz; within the next 5 minutes, the sampling rate shall not be less than 1HZ; and then

Less than 0.2HZ until the end of the experiment.

5. The displacement and time relationship curve displayed on the LCD screen. And automatically judge the test results.

6. Equipped with a water circulation system to ensure temperature balance.

7. The loading form adopts vertical loading, with constant load and reliable performance.

Asphalt mixture penetration tester in stock supply