Artificial intraocular lens ice pack

Stress free clamping

Ice is a very strong adhesive used for micro mechanical applications of many difficult to handle small components.

Due to this natural property, using AMCC ice sheets as a fixed system has many advantages.

-Rigid bonding of various materials, such as acrylic, acrylic, silicone resin, etc.

-Stress free mechanical clamping.

-Deep cooling improves the cutting surface conditions, especially for hydrophobic materials.

-There is no solid residue after disassembling the parts.

The AMCC ice plate is cooled by a dual flux heat exchanger, so only compressed air is needed to function.

The blank on the frozen core rod will freeze the water within a few seconds, and processing can begin. By shifting the airflow from freezing to thawing, thawing becomes easier.

These ice plates were originally used in workshops of the aerospace industry and have been demonstrated in the field of manufacturing fine parts, especially in the artificial crystal industry.

GFR-20-iol mounted on lathe

GFR-MF-20-iol

The lathe with GFR-20-IOL icing plate can use thinner blanks, saving materials and facilitating the next step of repositioning.

GFR-MF-20-IOL is interchangeable to accommodate different manufacturing steps. The core axis usually used for the first side is flat to accommodate a blank surface, while the core axis used for the second side is processed with a mirror image of the lens contour.

Due to the optional external center ring device, the positioning of the lathe disc can be easily achieved.

Due to the fact that the original "fixed length" clamp was used under the refrigeration unit, it is still easy to switch to "traditional" manufacturing.

GF-150-M

Each support plate GF-PLQ-150-Iol contains multiple washer positions. After the disc is locked on one or two surfaces, it is fixed on the gasket with ice.

-Work area: 150x100mm (external dimensions: 249x102x65mm)

-Multi positioning lens milling

-Detachable freezer plate, support plate, and positioning pad

-Work area: diameter 20mm (external dimensions: 144x81x745mm)

-Usually used as a preparation table, allowing for freezing during concealed times

-Mainly used as a "one after another" milling frame.

-Allow to maintain the centering efficiency of lathe machining