Anti rust, anti-corrosion, stainless steel, waterproof electronic scale manufacturer

Anti rust, anti-corrosion, stainless steel, waterproof electronic scale manufacturerThe scale panel is made of 1.5-2mm thick 304 stainless steel, with a brushed and polished surface and anti-static treatment. The scale body is made of carbon steel square tube and adopts a four horizontal and four vertical structure to avoid damage to the scale body caused by the displacement of weighing items during use and to ensure the accuracy of measurement results. It is firm and reliable.

Anti rust, anti-corrosion, stainless steel, waterproof electronic scale manufacturerBrief introduction

The scale platform adopts a meter shaped structure and is made of high-quality steel pipes with a thickness of 6mm. Its load-bearing capacity is more than 1.5 times that of ordinary counting scales, effectively preventing common phenomena such as deformation and bending of electronic platform scales. Weighing display device

The table adopts A1+P or A6 instruments, and the selection of adhesive printing instruments can be based on the actual requirements of customers.

Anti rust and anti-corrosion stainless steel strip printed electronic scale

1. The countertop is made of stainless steel, which is corrosion-resistant and has a long service life. The monitor can rotate 360 degrees and adjust five elevation angles.

2. Dual purpose charging/plugging type, capable of continuous use for 150 hours on a single charge.

3. There are two types of weighing platforms available for selection: aluminum die-casting and welding.

4. It has the functions of whole section peeling, pre peeling, and quantity warning.

5. Can be charged randomly; Equipped with undervoltage indication and protection device.

6. Randomly configure 6V/4AH maintenance free batteries.

optional

Optional RS-232 communication port, optional baud rate, and communication method.

Optional 20mA current loop large screen communication port.

Instructions for Use:

The installation and use of EX explosion-proof electronic platform scales must strictly follow the construction specifications

2. There should be no foreign objects such as stones or coal blocks stuck in the gaps around the platform scale

3. Regularly check whether the limit clearance is reasonable, and the limit bolt should not collide with the scale body

4. It is prohibited to perform arc welding operations on the platform scale

5. The grounding wire for arc welding must be set near the welded area and firmly in contact with the scale body

6. Disconnect the signal cable from the weighing display controller

7. Explosion proof electronic platform scale sensors must not be used as part of the arc welding circuit