Anli MS9740B Spectral Analyzer

Anli MS9740B Spectral Analyzer

Product Overview

Anli MS9740B spectrometer, with a wavelength range of 600-1750nm, is known for its wide dynamic range, high resolution, and high-speed scanning. It is an ideal choice for manufacturing and evaluating 850nm VCSEL modules, as well as testing active optical devices such as LD, WDM, and optical amplifiers. It can quickly complete one click measurements of multiple key parameters.

Spectral analyzer MS9740B

The desktop spectrometer MS9740B has the characteristics of wide dynamic range, high resolution, and fast scanning speed within the wavelength range of 600 nm to 1750 nm. It supports multi-mode fiber input and is an ideal choice for manufacturing and evaluating 850 nm band VCSEL modules.

MS9740B reduces measurement processing time by half * 1 while maintaining its original functionality and performance, while overcoming the problem of decreased measurement sensitivity caused by faster processing speed.

In addition, it also retains optically active devices (LD modules DF-LD、FP-LD、LED、PMD、WDM、 The measurement menu screen for optical amplifiers and WDM filters is used to evaluate the devices. It supports one-time measurements of key evaluation items, such as optical center wavelength, level, signal-to-noise ratio, spectral width, etc., and displays the results on one screen.

*1: Rx bandwidth setting: 1 kHz/200 Hz

function

Main characteristics of spectrum analyzer MS9740B

Users typically use the wide dynamic range and high-speed measurement of optical receivers in production lines for optically active devices.

The edge mode suppression is 45 dB lower than the measured value

Large measurement processing time * 1 is 0.35 seconds (scanning 30 nm wavelength)

Facilitates Stable Production of High-output LDs

±1.4 dB SMSR reproducibility*2

Same key features and performance as previous generation products, supporting various production line environments

Used to evaluate the wideband (600 nm to 1750 nm) of all photoactive devices

9 application menus for measuring LD modules, WDM, etc

Anli MS9740B Spectral AnalyzerMain uses and application areas

MS9740B has a wide range of applications, mainly focused on the characteristic evaluation and quality control of photoactive devices:

VCSEL module manufacturing and testing: It is an ideal tool for evaluating and manufacturing 850 nm band VCSEL (vertical cavity surface emitting laser), especially suitable for short distance interconnect applications in data centers.

Evaluation of various types of lasers:

Distributed feedback laser: Accurately measure its center wavelength and edge mode suppression ratio.

Fabry Perot laser: analysis of its multi longitudinal mode characteristics.

Laser module: comprehensively test parameters such as output power and spectral width.

Testing of wavelength division multiplexing system components:

WDM light source: Analyze the spectra of multiple channels.

Optical amplifier: Evaluate its gain, noise figure, etc.

WDM filter: measure its passband, stopband, and isolation.

Other devices: also applicable for spectral characteristic analysis of light-emitting diodes, polarization mode dispersion modules, etc.

target audience

Optical device manufacturer: Conduct rapid and highly repetitive product inspection and quality control on the production line.

Research and development institutions and laboratories: used for precise performance verification and characteristic analysis when developing new devices.

Equipment system integrator: Conduct performance evaluations of optical modules and components during incoming inspection or system debugging.