-
E-mail
sales05@szkejing.com
-
Phone
18126374197,18038052872
-
Address
Building 5, Huafeng Longgang Study Abroad Production Park, Baolong 1st Road, Nanyue Community, Baolong Street, Longgang District, Shenzhen City
Product Categories
Shenzhen Kejing Zhida Technology Co., Ltd
Aluminum plastic film forming machine
NegotiableUpdate on 12/14
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Application scope: MSK-120-SV aluminum-plastic film forming machine is an aluminum-plastic film forming equipment used for soft pack lithium-ion batteries. This device is driven by a servo motor, with programmable pit depth and customizable molds, enabling the molding of aluminum-plastic film shells for lithium-ion batteries of different sizes
Product Details
MSK-120-SVAluminum plastic film forming machineIt is an aluminum-plastic film forming equipment used for soft pack lithium-ion batteries. This device is driven by a servo motor, with programmable pit depth and customizable molds, enabling the molding of aluminum-plastic film shells for lithium-ion batteries of different sizes.
| Features |
|---|
Sheet aluminum-plastic film molding, suitable for research and sample preparation;
Driven by servo motor, the depth and speed of the pit can be programmed;
High strength frame, precise upper and lower templates ensure molding accuracy, and the aluminum-plastic film after molding is free from defects such as pulling or cracking;
Comes standard with a set of standard size molds, other specifications can be customized according to customer requirements;;
Design a safety light curtain at the feeding port, and equip the mold with a scapegoat for debugging to ensure safe operation;
PLC control, HMI operation, convenient and easy to use.
| Technical Specifications | |
|---|---|
| power supply | Single phase AC220V ± 10% (customizable AC110V), frequency 50/60Hz, power 500W |
| molded dimensions | Double hole foldable (with airbag): Max.L90 × W80mm (airbag punch hole width 20mm) Single hole can be folded in half (with airbag): Max.L100 × W80mm (airbag punching hole width 20mm) Single pit four side sealing (with airbags): Max.L180 × W80mm (airbag punching pit width 20mm) Single pit with four sides sealed (without airbags): Max.L180 × W110mm Please refer to the product evaluation at the end of the article for details |
| Standard mold | L61 × W47mm (single hole can be folded in half, airbag punching hole width 20mm; recommended aluminum-plastic film size: L204 × W157mm) |
| Mold opening itinerary | About 60 mm |
| Chongkeng | Depth: Max 6mm, depending on the material and thickness of the aluminum-plastic film Resolution: 0.01mm |
| Reference production capacity | 150-200pcs/h， Determined by the proficiency level of the operators |
| counting method | Touch screen display |
| Device dimensions | L500*W400*H925mm |
| weight | About 250Kg |
DisclaimersThe product introduction content of this website (including product pictures, product descriptions, technical parameters, etc.) is for reference only. Due to delayed updates, there may be some discrepancies between the content and the actual situation. Please contact our customer service personnel for confirmation. The information provided on this website does not constitute any offer or commitment. Kejing Company may periodically improve and modify any information on the website without prior notice.
