- Phone
-
Address
208, 2nd Floor, Dengfeng Building, No. 636 Yingbin Avenue, Dengfeng Community, Jiangnan Street, Licheng District, Quanzhou City, Fujian Province
Product Categories
Quanzhou Zhonghan Trading Co., Ltd
Alemite Pneumatic Lift Pump 7216-4
NegotiableUpdate on 05/17
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Alemite Pneumatic Lift Pump 7216-4 is an American brand 1:1 pneumatic lift pump, suitable for 55 gallon standard oil drums, made of carbon steel material, PTFE+nylon seal, 1/4 inch inlet and 1 inch outlet, with a flow rate of about 14 gallons per minute. It is suitable for transporting low to medium viscosity oil products, solvents, and mildly corrosive liquids. The double ball suction tube is self suction reliable and commonly used in industry.
Product Details
Alemite Pneumatic Lift Pump 7216-4
Alemite Pneumatic Lift Pump 7216-4
1、 Model and brand
brandAlemite (Alemite, a century old lubrication equipment brand in the United States, now part of SKF Group)
model：7216-4(Standard 1:1 pneumatic bucket pump)
Adapt to bucket type55 gallon (200L) standard oil drum
2、 Product performance
Pump ratio1:1 (Pneumatic input=Fluid output pressure)
traffic：14 gallons per minute (approximately 53L/min), 25 cycles per gallon
Viscosity range: 5-4000 cP (low to medium viscosity fluids)
Self suction abilityDouble ball pipette, reliable self-priming and anti cavitation
Working pressure：0.3–0.7 MPa（3–7 bar）
noise≤ 85 dB (compliant with OSHA standards)
3、 Material specifications (liquid receiving part)
Pump body/bucket tube：Carbon SteelCorrosion resistance and high strength
sealing element：PTFE (polytetrafluoroethylene)+nylon IIResistant to oil, solvents, weak acids and bases
air intake1/4 'NPTF (internal thread)
出料口1 'NPTF (internal thread)
weightApproximately 14 lb (6.4 kg)
4、 Technical parameter table
table
| project | parameter |
|---|---|
| model | 7216-4 |
| pump type | Pneumatic bucket pump (1:1) |
| Adaptive bucket | 55 gallons (200L) |
| traffic | 14 GPM（53 L/min） |
| Working pressure | 3–7 bar（0.3–0.7 MPa） |
| wetted material | carbon steel |
| seal | PTFE+Nylon II |
| air intake | 1/4' NPTF |
| 出料口 | 1' NPTF |
| Viscosity range | 5–4,000 cP |
| weight | 6.4 kg |
5、 Main purpose
Industry: TransportationEngine oil, hydraulic oil, gear oil, cutting fluid, solvents, low viscosity ink, daily chemical raw materialswait
Chemical Industry: Medium to Low Corrosive Liquids (Suitable for Carbon Steel)
Packaging: 55 gallon drumExtract, transfer, and addSuitable for batch conveying in workshops, warehouses, and production lines
6、 Packaging
packaging method: Single cardboard box+shockproof foam, including pump body, barrel inserting tube, barrel end adapter, instructions
Size/WeightApproximately 120 × 20 × 20 cm, gross weight approximately 7.5 kg
Standard accessoriesAdjustable bucket mouth adapter (compatible with standard 55 gallon buckets)
7、 Instructions for use (key points)
InstallInsert the pump into a 55 gallon bucket and tighten the bucket lid adapter; Connect the 1/4 'air pipe to the air source, and connect the discharge port to a 1' hose.
operationSlow ventilation (3-7 bar), adjust air pressure to control flow rate; Double tube automatic suction, no need to pump.
Media adaptationLimited to 5-4000 cP fluids only; Avoid strong acids, bases, and solvents (such as concentrated hydrochloric acid and acetone).
maintenanceRegularly clean the intake filter; When not in use for a long time, empty the medium inside the pump to prevent solidification.
8、 After sales service
