Air filter for air conditioning

NegotiableUpdate on 07/24

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

How to maintain air filters to extend their lifespan? Initially, when dealing with this situation, the main unit is usually disassembled. Soak in a special cleaning agent, then clean and soak the fuel tank, cooler, and main oil circuit components. The process is complex, time-consuming, and laborious.

Product Details

Product Introduction/ Product introduction

air filterHow to maintain parts to extend their lifespan

At first, when dealing with this situation, the host is usually disassembled. Soak in a special cleaning agent, then clean and soak the fuel tank, cooler, and main oil circuit components. The process is complex, time-consuming, and laborious. Similarly, all seals of the air filter must be replaced after soaking. Cleaning is very expensive. However, there is currently no need to deal with this situation, only specialized tar testing agents need to be used to test oil samples, such as determining oil coking. Just add one tenth of the lubricant to the air compressor lubricant, and then turn it on for 40-60 hours. The interior of the air filter will be thoroughly cleaned. Then add new oil to ensure its normal operation. Save time and energy, and have low costs. Wana cleaning agent does not react chemically with engine oil and only dilutes coke, so it will not cause any corrosion to the metal and non-metal parts of the machine. Wana tissue is not irritating to the skin and can come into direct contact with the skin. Cooling effect of air filter: The injected oil is mixed with compressed gas in the form of droplets. The large heat exchange surface quickly absorbs the compression heat of the gas, cools the compression medium, and greatly reduces the exhaust temperature. Lubrication: In a dry screw compressor, the two rotors are not in contact with each other and the clearance is maintained by a high-precision synchronous gear. In a fuel injection compressor, due to the presence of a large amount of oil and the fact that the female rotor only absorbs a small portion of the total power consumption of compression, the synchronous gear can be omitted, and the male rotor directly drives the female rotor.

In addition, since the injected oil is exactly the same as the lubricating oil used in the bearings, there is no need to use complex sealing devices to separate the gas from the lubricating oil, which makes the distance between the rotor support bearings smaller and significantly improved. The rigidity of the rotor reduces deformation and sealing effect: there are multiple leakage channels inside the screw compressor. These leakage channels are narrow and long gaps. The presence of oil greatly enhances the sealing effect, reducing leakage through them.