Air compression system

The screw compressor adopts the idea of large rotor, large bearing, and low speed, and adopts direct connection without gearbox. At low speed, it reduces the source of faults and improves the stress condition of the main engine;

The screw host adopts an integral casing, and the rear bearing seat and compression chamber are machined together to ensure the coaxiality, parallelism, perpendicularity and other positional tolerances, thereby ensuring the reasonable clearance of each moving pair;

The screw host adopts SKF heavy-duty bearings and SEALTECH shaft seals;

The timing for closing the intake and opening the exhaust of the screw host, as well as the positions of the fuel injection and return ports, are all designed according to the latest research results, with a reasonable internal pressure ratio and sufficient oil gas heat exchange;

The equipment has a simple and reasonable structure, is mature and reliable, has a low failure rate, and is easy to assemble and maintain;

Friendly human-machine interface intelligent control system control, free choice of operation mode;

The equipment operates with low noise, high efficiency, and is energy-saving.

Adopting high-quality copper tube heat exchangers with high efficiency and small size;

Adopting an automatic control system to automatically adjust the cooling capacity and control the drainage. Using a temperature controller to control the start stop and high/low voltage power-off protection of the fan, automatically controlling the cooling capacity and machine operation according to different working conditions, automatic drainage, high degree of automation, and effective energy saving;

Strong freezing ability, equipped with high-performance high-power refrigerant compressor, fully pre cooled and then cooled, with a processing air volume 30% higher than similar products, stable dew point temperature, and the ability to form water mist droplets from 99% of water vapor;

dehydrationStrong ability, specialDesign a gas-liquid separator with dual separation of centrifugal and collector, achieving an efficiency of over 99%.

The micro heat adsorption compressed air dryer is an adsorption dryer developed by absorbing the advantages of both heat adsorption and non heat adsorption compressed air dryers. It avoids the disadvantages of short switching time and high regeneration air loss in non heat adsorption compressed air dryers, while also overcoming the disadvantage of high electricity consumption in heat adsorption compressed air dryers. The dryer has a reasonable switching time and low consumption of regeneration gas, making it a relatively economical and energy-saving adsorption dryer in the industry;

The dew point of the compressed gas provided can reach -40 ℃.

thisAir compression systemAdopting three-stage filtration and segmented purification treatment, it fully removes pollutants in the compressed air system, such as corrosive solid particles such as dust, iron filings, and scale, compressor lubricants, condensed water droplets and acid cooled condensate, as well as oil and hydrocarbon mist, providing high-quality dry compressed air that meets the application requirements for gas equipment.