Agway high and low temperature test chamber

Agway high and low temperature test chamberMeet the test method: GB/T2423.1-2008 (IEC60068-2-1:2007) Low temperature test method Ab

GB/T2423.2-2008 (IEC60068-2-2:2007) High temperature test method Bb

GJB150.4-1986 Low temperature test

GJB150.3-1986 High Temperature Test

Agway high and low temperature test chamberProhibited:

Testing or storage of samples of flammable, explosive, and volatile substances;

Testing or storage of corrosive substance samples；

Testing or storage of biological samples；

Testing or storage of strong electromagnetic emission source samples；

Testing or storage of radioactive material samples；

Testing or storage of highly toxic substance samples；

The testing or storage of samples that may produce flammable, explosive, volatile, highly toxic, corrosive, and radioactive substances during the testing or storage process.

Test environmental conditions: The ambient temperature is+5~+28 ℃, the relative humidity is ≤ 85%, and there is no sample in the test chamber.

Thermal insulation enclosure structureOuter wall material:High quality sand faced stainless steel plate,Inner wall material: high-quality mirror stainless steel plate (sealing strip can withstand high and low temperatures ranging from -100 degrees to+300 degrees, with a lifespan of 10 years),Box insulation material: rigid polyurethane foam+glass fiber.

Standard configuration of the test box observation window: 1 transparent electric heating film insulated tempered glass (located on the door), 1 lead hole: 50mm (located on the left side of the box), indoor lighting (high-efficiency, long-lasting, energy-saving lamp) is equipped on the door, 4 movable casters, sample rack: 1 layer of stainless steel sample rack, 4 hooks, load-bearing capacity (uniform distribution): 25kg/layer (the cumulative total load-bearing capacity of the samples in the box does not exceed 100kg).