Agricultural Intelligent Meteorological Station

Agricultural intelligent weather stations are mostly located outdoors and require stable brackets to secure the equipment, ensuring wind resistance and avoiding equipment tipping over due to strong winds. At the same time, the equipment casing should be treated with waterproofing and anti-corrosion measures to avoid damage caused by rainwater and pesticide residues in orchards. After installation, it is necessary to debug the transmission function of the equipment to ensure stable data upload. At the same time, the installation status of the equipment should be checked regularly, and the positions of the brackets and sensors should be adjusted in a timely manner to ensure the long-term accuracy of monitoring data.

1、 Product Introduction

NQ8Agricultural Intelligent Meteorological Station‍It is a highly integrated, low-power, quick to install, and easy to use high-precision meteorological observation equipment for field monitoring.

The device consists of five parts: meteorological sensor, collector, solar power supply system, pole bracket, and cloud platform. No debugging required, can be quickly deployed, widely used in fields such as meteorology, agriculture, forestry, scientific exploration, etc.

2、 Product Features

1. Low power collector: Static power consumption less than 50uA

2. Standard GPRS networking, support for extended Bluetooth, wired transmission

3. Seven inch Android touchscreen, version 4.4.2, quad core Cortex ™- A7，512M/4G

4. Support modbus485 sensor expansion

5. Solar charging management MPPT automatic power point tracking

6. Three meter carbon steel bracket with two threaded connections

7. SMS alarm, send SMS to mobile phone after exceeding the limit

8. ABS material protective box, corrosion-resistant, anti-oxidation, waterproof rating IP66

3、 Technical parameters

1. Collector power interface: GX-12-3P plug, input voltage 5V, with RS232 output JSON data format, collector power supply: DC5V ± 0.5V peak current 1A,

2. Sensor Modbus, 485 interface: GX-12-4P plug, output power supply voltage 12V/1A, device configuration interface: GX-12-4P plug, input voltage 5V

3. Powered by solar energy and equipped with lead-acid batteries, optional 30W 20AH/50W 20AH/100W 100AH. Charging controller: 150W, MPPT automatic power point tracking, efficiency increased by 20%

4. Data upload interval: adjustable from 1 minute to 1000 minutes

5. Screen size: 1024 * 600 RGB LCD

6. Partial sensor parameters

Name Measurement Range Resolution Accuracy

Environmental temperature -40~+80 ℃ 0.01 ℃± 0.3 ℃ (25 ℃)

Relative humidity 0-100% RH 0.01% RH ± 3% RH (20%~80%)

Light intensity 0-157286LUX1Lux<± 3%

Atmospheric pressure 300-1100hPa 0.1hPa ± 0.25%

Dew point temperature 0~+70 ℃ 0.1 ℃± 1 ℃

Pipe soil temperature -30~+70 ℃ 0.01 ℃± 0.3 (-10~70 ℃)

Pipe type soil moisture 0-100% 0.1% ± 3%

Pipe type soil salinity: 0~20000 us/cm, 1 us/cm ± 3 (0~10000 us/cm) ± 5% (full range)

Soil pH (electrode method) 0-14PH0.01 ± 0.1PH

Soil nitrogen, phosphorus, potassium 0~1999mg/kg1 mg/kg ± 2%

Soil evaporation rate: 0-75mm, 0.1mm ± 1%

Wind direction 0-360 ° (8 directions) 1/8<3 ° (>1.0m/s)

Wind speed 0-30m/s 0.1m/s ± (0.2+0.03V) m/s (25 ℃, V represents wind speed)

Rainfall ≤ 4mm/min0.2mm ≤± 2%

UV radiation 0-500W/㎡ 0.01W/㎡ ≤± 3%

Sunshine hours 0-6500h 0.1 h<0.2 h

Total photoelectric radiation 0-2000W/m21W/m2<± 3%

Photosynthetically active radiation 0-2000W/m21W/m2 ≤± 5%

Carbon dioxide 400-5000ppm 1ppM ± (50ppm+5% reading)

PM2.50-1000ug/m ³ 1ug/m ³ ± 10% (<500 micrograms)

PM100-1000ug/m ³ 1ug/m ³ ± 10% (<500 micrograms)

Carbon monoxide 0-1000ppm1PPM ± 2PPM

Sulfur dioxide 0-20PPM 0.1PPM ± 1PPM

Nitrogen dioxide 0-20PPM 0.1PPM ± 1PPM

Ozone 0-20PPM 0.1PPM ± 1PPM

Negative oxygen ions ranging from 0 to 100000/cm3, with a reading of ± 10%; Ionic mobility ≤± 20%

Oxygen content 0-25% Vol0.1% ± 3% FS

4、 Cloud platform

1. CS architecture software platform, supporting direct observation through mobile and PC browsers without the need for additional software installation.

2. Support multi account and multi device login

3. Support real-time data display and historical data display dashboard

4. Cloud servers and cloud data storage are stable, reliable, easy to scale, and load balanced.

5. Support SMS alarm and threshold setting

6. Support map display and viewing device information.

7. Support data curve analysis

8. Support data export in tabular format

9. Support data forwarding, HJ-212 protocol, TCP forwarding, HTTP protocol, etc.

10. Support data post-processing function

11. Support external running of JavaScript scripts