Advantages of VS0.2GP012V32N11/4 VSE flowmeter

Advantages of VS0.2GP012V32N11/4 VSE flowmeter

VSE Germany's main products include gear flow meters, screw flow meters, turbine flow meters, external gear pumps, internal gear pumps, radial piston pumps, axial piston pumps, magnetic centrifugal pumps, permanent magnet couplings, elastic couplings, aluminum oil tanks, bell covers, oil tank heaters, heat exchangers, pressure measuring joints, etc.

Flow meters are further divided intoDifferential pressure flowmeter、rotameter、Throttling flowmeterFine seam flowmeter, volumetric flowmeterElectromagnetic Flowmeter、ultrasonic flowmeterWait. Classified by medium:liquid flow meterAnd gas flow meters.

VSE VS0.2 flowmeterIt is a type of volumetric flow meter, classified by medium, and also belongs to liquid flow meters.

Volumetric flow measurement is the use of a fixed small volume to repeatedly measure the volume of fluid passing through a flow meter. Therefore, there must be a space inside the volumetric flowmeter that constitutes a standard volume, commonly referred to as the "measuring space" or "measuring chamber" of the volumetric flowmeter. This space is occupied by an instrumentThe inner wall of the watch case and the rotating components of the flow meter are together formed.

liquidflow meterIt is manufactured based on the Karman vortex principle for measuring liquids and gases in sealed pipelinesThe precision instrument for steam flow is highly regarded by users due to its sealed detection element inside the detection body, no measured medium, and no movable parts inside, which does not require on-site maintenance. It is widely used in the measurement management and process control of textile printing and dyeing, petroleum, chemical, metallurgical and pharmaceutical, thermoelectric, paper making, and fire protection industries Equipped with on-site display, 3.6V battery power supply, external power supply, and 4-20mA output; remote display can be equipped with secondary instrument LCD Chinese display, and can also be equipped with temperature and pressure compensation. Instrument direct reading type, no conversion required, easy to use, reliable quality.

Classification:

Volumetric flow meters can be classified according to their measuring components, including elliptical gear flow meters, scraper flow meters, dual rotor flow meters, rotary piston flow meters, reciprocating piston flow meters, disc flow meters, liquid sealed rotary cylinder flow meters, wet gas meters, and membrane gas meters.

Advantages of VS0.2GP012V32N11/4 VSE flowmeter

Advantages: High measurement accuracy, installation pipeline conditions have no impact on measurement accuracy, can be used for measuring high viscosity liquids, wide range, direct reading instruments can directly obtain accumulation without external energy, total amount, clear and easy to operate.

Disadvantages: The complex structure results in high weight and cost, making it unsuitable for liquids with foreign objects and low viscosity (above 1CP), bearings are prone to wear and require regular inspection, installation work is complex and labor-intensive, and the competitiveness is relatively low in medium and large diameters.

Volumetric flow meters, differential pressure flow meters, and float flow meters are among the three most widely used types of flow meters, commonly used for measuring the total amount of expensive media such as oil and natural gas.

Application:
It can measure all liquids that can be handled by pumps and have known lubrication characteristics, such as gasoline, paraffin, kerosene, diesel, special hydraulic working oil, mineral oil and hydraulic oil (including fire-resistant liquids, inks, dyes and coatings, grease, polyurethane, polyols and isocyanates, epoxide resins, glues, pastes and cream, resins, waxes, etc.).

VSE flowmeterScope of application

Widely used in the automotive industry:
Brake system test bench
Fuel consumption measurement
Polyurethane foam for steering wheel, instrument panel, seat, etc
Paint spraying system
steering system
Dosage and canning of engine oil, brake fluid, antifreeze, anti-corrosion fluid, wax oil, etc
Adhesive coating for windshield, headlights, engine hood, etc

hydraulic pressure:
Volume and flow velocity measurement
Leakage and rupture detection
Cylinder speed and position measurement
Positioning and grading control
Measurement, control, and regulation of flow velocity and flow rate
Hydraulic pump, motor, valve, quantitative valve and servo valve testing bench
Multi cylinder synchronous monitoring
Canned and additive mixed

Dyes and Coatings:
Coatings and Spray Systems
Dosage and canning
Traffic, flow rate, and consumption

Plastic technology:
Single component and multi-component molten plastic mixing, molding, and proportioning systems
Consumption measurement, such as epoxy resin adhesives and potting compounds used for transformers, coils, relays, condensers, armatures, starters, and automotive electronic components.

Chemical industry:
Measurement of flow rate and flux in refinery and power plant systems, control and regulation of the mixing ratio and consumption of single combination multi-component mixtures.