- Phone
-
Address
Room 203, Building 3, No. 315 Jianlan Road, Malu Town, Jiading District, Shanghai
Product Categories
Shanghai Chasen Instrument Co., Ltd
Adhesion tester
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The adhesion tester measures 180 #176; Instrument for adhesion. Adhesion can be measured at different tensile speeds.
Product Details
180 ° adhesion tester PA-1000-180
ChemInstruments' PA-1000-180 adhesion tester is an instrument used to measure 180 ° adhesion. Adhesion can be measured at different tensile speeds.
PA-1000-180 ChemInstruments American Adhesion TesterProduct Features:
1. Applicable standards:
PSTC：101 (A, B, C, D, E, F), 4, 15, 55
ASTM D3330、AFERA：4001 P11
TLMI：L-IA1, L-IA2, L-IA3
FINAT：FTM 1-6, 10, 11
2. Can display average, highest, and lowest values
3. Can display the current instantaneous numerical value
4. You can choose to express it in grams, kilograms, ounces, pounds, or newtons
5. Choosing EZ-LAB software can draw distribution graphics.
6. The fixture platform is suitable for test pieces ranging from 2 '(5 cm) wide to 6' (15 cm) long.
7. Adjustable load cell settings for test pieces of different lengths
Attention: Before plugging in, it is necessary to confirm that there is no condensed water vapor inside.
PA-1000-180 ChemInstruments American Adhesion TesterTechnical parameters:
1. Three speed ranges: 15cm/min, 30cm/min, and 60cm/min
2. Load cell 10 pounds
3. Accuracy load cell within ± 0.1% of the entire domain
4. The angle is only 180 degrees
5. Rated voltage 120V or 240V
6. Operating temperature range from 0 ° C to 70 ° C
7. Size:
Height: 8 inches (20.3 cm)
Width: 23 inches (58.5 centimeters)
Depth: 12 inches (30.5 centimeters)
8. Weight: 29 pounds (13 kilograms)
Recommended products for purchase:
EZ-LAB data collection software
PA-180-EZ-LINK chip
This data collection system is a very convenient software for handling power testing.
This system not only reads the force measured by the instrument for each test, performs calculations such as drawing, integration, and averaging, but also stores them in the computer memory.
Other optional items:
ATA tool kit (recommended for purchase), since you have purchased standard instruments, the steel plates, rollers, and cutters must also be standard in order to truly meet the requirements. include
TP-26 10 pieces, standard steel piece 2 '× 6' (5cm x 15cm)|
HR-100 1 piece, standard manual rolling wheel 4.5 pounds, (2 kilograms)
SCF-100 1 unit, specially designed test piece cutter, capable of cutting 1 inch wide, convenient, fast, and accurate.
By connecting an external computer and using EZ-LAB software, remote control and enhanced data collection functions can also be achieved
TC-1000 is a specially designed temperature control console that can measure adhesion at different temperatures.
