Welcome Customer !

Membership

Help

Fujian Lingrui Intelligent Technology Co., Ltd. Wuhu Office
Custom manufacturer

Main Products:

instrumentb2b>Products

Fujian Lingrui Intelligent Technology Co., Ltd. Wuhu Office

  • E-mail

  • Phone

  • Address

    Room 509, Taixin Business Center, Yijiang District, Wuhu City, Anhui Province

Contact Now

AVEENTICS solenoid valve

NegotiableUpdate on 05/10
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin

Overview

AVEENTICS solenoid valve $r $n structural features slide valve, positive overlap $r $n operation electronic $r $n pilot internal $r $n sealing principle soft seal $r $n working pressure range See table $r $n control pressure small/large See table $r $n ambient temperature 0 .. 50 The temperature range of C $r $n medium is 0 .. 60 C $r $n medium compressed air $r $n particle size max 5 The oil content in m $r $n compressed air is 0 .. 5 mg/m $r $n rated flow Qn 500 l

Product Details

AVEENTICS solenoid valve

5/2

  • Qn = 500 l/min

  • Width of pre control valve: 15 mm

  • Tubular connection

  • Compressed air interface outlet: G 1/8

  • Electrical connection: Multi core plug, ISO 15217, Type C

  • Manual control device: button type

  • With spring reset/air spring reset

  • Pioneer: Internal

Structural point slide valve, positive overlap

Operating Electronics

Lead internal

Sealing principle: Soft seal

Range of work pressure see table

Control pressure See table

The ambient temperature is 0 .. 50 °C

The temperature range of the medium is 0 .. 60 °C

Compressed air medium

Particle size max 5 µ m

The oil content in compressed air is 0 .. 5 mg/m³

Rated flow Qn 500 l/min

AVEENTICS solenoid valve

Standardized Circuit Interface ISO 15217

Protection level with interface IP65

Temporary load rate of 100%

Assembly of PRS conductor board on multi line conductor board

Fixed bolt M3

Weight See table

Aluminum shell, anodized treatment

Sealed hydrogenation acrylonitrile resin

Front panel polyamide

Threaded pipe sleeve aluminum material

Do not exceed the small control pressure, otherwise it may cause circuit faults and possible valve failures!
The pressure dew point must be at least 15 ° C lower than the ambient and medium temperature, and the allowable temperature is 3 ° C.
The oil content of compressed air must remain constant throughout its entire service life.
Only oils approved by AVEENTICS company can be used. For detailed information, please refer to the document "Technical Information" (obtained from MediaCentre)