AVEENTICS clamping unit

AVEENTICS clamping unit

Mode of action: Maintain spring force, Release: Compressed air

Function type fixed with clamps

Appropriate piston rod diameter of 20 mm

Piston diameter 63 mm

Compressed air connection G 1/8

AVEENTICS clamping unit

Function fixed with clamps

Discharge pressure 4 .. 8 bar

Environmental temperature -10 .. 60 °C

Medium temperature range -10 .. 60 °C

Compressed air medium

Particle size max 5 µ m

The oil content in compressed air is 0 .. 5 mg/m³

Weight See table

Attention: Stop elements must not be used for the following purposes: - as safety devices in dynamic stops

The support can only be removed in a powerless state

Ensure that the load direction remains unchanged during the clamping interval. Changing the direction of force, as well as external forces such as strong vibrations or torsional forces, can cause short-term release of the piston rod and may result in damage to the clamping unit HU1.

In the clamped state, there should be no excess pressure (0 bar) on the stop element.

Attention: Small control pressure>=cylinder working pressure!

The support can only be removed in a powerless state

Ensure that the load direction remains unchanged during the clamping interval. Changing the direction of force, as well as external forces such as strong vibrations or torsional forces, can cause short-term release of the piston rod and may result in damage to the clamping unit HU1.

In the clamped state, there should be no excess pressure (0 bar) on the stop element.

Attention: Small control pressure>=cylinder working pressure!