Welcome Customer !

Membership

Help

Tianchou (Shanghai) Automation Equipment Co., Ltd
Custom manufacturer

Main Products:

instrumentb2b>Products

Tianchou (Shanghai) Automation Equipment Co., Ltd

  • E-mail

  • Phone

  • Address

    Building 1, 6400 Yinggang East Road, Qingpu District, Shanghai

Contact Now

AVEENTICS ED07 proportional valve 5610264520

NegotiableUpdate on 05/12
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin

Overview

AVEENTICS ED07 Proportional Valve 5610264520 $r $nAVENTICS E/P Pressure Regulating Valve, Series ED07 5610264520 $r $n Product Description $r $nD07-000-100-010-2M12C

Product Details

AVEENTICS ED07 proportional valve 5610264520

AVENTICS ™ E/P pressure regulating valve, series ED07 5610264520

Product Description

ED07-000-100-010-2M12C

AVEENTICS ED07 proportional valve 5610264520

• Robust pilot valve technology

• Control accuracy and dynamism

• Suitable for a wide range of applications

• High gas flow rate • ED07 supports different types of connections

From simulation version to fieldbus connection

Through EtherCAT

AVEENTICS ED07 Dynamic Direct Acting Pressure Reducing Valve

The ENTICS series ED07 provides proportional boost and independent control of the exhaust valve, providing dynamic control for applications.

High dynamic proportional pressure reducing valve

Stackable board

Nominal width 7

Flow rate of 1300 liters per minute

Pressure range -1 20 bar

EtherCAT, AES field line connection

When using oil-free dry air for technical information, other installation locations can be provided upon request. Only when the plug is installed correctly can the level be ensured. For detailed information, please refer to the operating manual. The minimum working pressure is 0.5 bar, and the maximum required secondary pressure can be provided as required. Other pressure setting ranges must comply with the minimum control pressure, otherwise it may cause switch failure and valve failure! The pressure dew point must be at least 15 ° C lower than the ambient temperature and medium temperature, and must not exceed ° C. The oil content in compressed air must remain constant throughout its lifecycle. Only use oils approved by AVEENTICS. Other information can be found in the 'Technical Information' section