Shenzhen Saiyiou Electronics Co., Ltd

Custom manufacturer

Main Products:



EMAIL

CALL NOW

instrumentb2b>Products

Product Categories

Shenzhen Saiyiou Electronics Co., Ltd

E-mail
Phone
Address
B502, 5th Floor, Zhongcheng Industrial Park, No. 274 Longhua Industrial Road, Songhe Community, Longhua Street, Longhua District, Shenzhen City

Contact Now

ATA-4000 series high-voltage power amplifier

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The ATA-4000 series high-voltage power amplifier is an ideal amplifier that can amplify both AC and DC signals. The maximum output voltage is 310Vp-p ( 155Vp) and the power is 547.1Wp, which can drive high-voltage power type loads. Voltage gain and DC bias can be finely adjusted by CNC, providing customers with a wide range of testing options.

Product Details

ATA-4000 series high-voltage power amplifierIt is an ideal high-voltage power amplifier that can amplify both AC and DC signals. The maximum output voltage is 310Vp-p (± 155Vp) and the power is 547.1Wp, which can drive high-voltage power type loads. Voltage gain and DC bias can be finely adjusted by CNC, providing customers with a wide range of testing options.

Signal high-speed response

The ATA-4000 series has a maximum bandwidth of up to 3MHz, ensuring high signal conversion rates and good step response.
CNC gain adjustable

The ATA-4000 series breaks the traditional fixed gain multiplier,With the numerical control gain adjustment function, this function can directly adjust the multiplier of the power amplifier in X1 and X0.1 steps, suitable for various scientific research experiments that require fine voltage adjustment.
Output DC bias adjustment

The ATA-4000 series amplifier is equipped with a built-in DC bias adjustment function, which can directly set the DC voltage on the amplifier to superimpose the AC voltage of the signal generator for output, and can achieve fine adjustment of 1V and 0.1V, thus serving as a DC power supply fluctuation test for the load end.
Four quadrant output

When an AC voltage is applied to a capacitive or inductive load, due to the phase difference between the current and the voltage signal caused by the load characteristics, the current will flow back from the load end, and general power supplies or amplifiers will be unable to drive. The ATA-4000 series has the characteristic of four quadrant output, which can both output and absorb current, making it possible to drive various types of loads.
Master slave function

The ATA-4000 series all have single channel output, which can be selected when more channels are needed for synchronous output in experiments. This function can cascade multiple power amplifiers, set the parameters of the host, and the cascaded slaves can synchronously make changes. Disconnecting allows for independent control.
short circuit protection

This function is suitable for scientific research experiments where the power consumption of the load is unclear and leads to breakdown, and there is no risk of instrument failure. It can promptly cut off the output. However, for instruments that only have overcurrent protection, if not cut off in time, it will lead to amplifier failure.

ATA-4000 series high-voltage power amplifierFeatures:

Maximum output power 547.1Wp
Bandwidth (-3dB) DC~3MHz
Maximum output voltage 310Vp-p (± 155Vp)
Maximum output current of 4Arms
Bipolar output
DC bias 0.1V step adjustable

Similar Product Recommend