Welcome Customer !

Membership

Help

Shanghai Weitelui Industrial Development Co., Ltd
Custom manufacturer

Main Products:

instrumentb2b>Products
Product Categories

Shanghai Weitelui Industrial Development Co., Ltd

  • E-mail

  • Phone

  • Address

    Room 1501-1502, Caoyang Business Building, 889 Zhongjiang Road, Putuo District, Shanghai

Contact Now

AS8-U-230 Clark Indicator in Large Stock

NegotiableUpdate on 05/12
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin

Overview

The AS8-U-230 Clark Indicator is a display and control device used for dynamic flow and volume measurement, with a large amount of stock available. The setting can be completed through three buttons. After removing the panel, three buttons can be seen, or settings can be made through a film keyboard in the F specification. AS8-U-230 Clark Indicator in Stock

Product Details

AS8-U-230 Clark Indicator in Large Stock

Clark AS8 indicator:

The AS 8 standard specification is a display and control device used for dynamic flow and volume measurement. The setting can be completed through three buttons. After removing the panel, you can see these three buttons, or you can set them through the film keyboard in the F specification.
2. The conversion of display units can be achieved through the Dip dip switch. The Dip dip switch is located behind the panel.
3. It has two programmable relays, one analog output terminal or one serial interface RS 232 for external reprocessing.
4. The flow meter can be directly connected through an integrated 24 VDC sensor power supply.
5. Optional embedded, desktop, or 19; Slot style.
Accuracy characteristics:
1. The precision data designed by KRACHT refers to the geometric tooth product Vgz, which is the percentage offset corresponding to the current value in each case.
2. The linear error of the entire measurement range is<± 0.1%
3. The repeatability of the measured values is less than 0.1%
4. Accuracy testing is a part of quality inspection in various situations
5. The test results can be recorded in the form of precision characteristic curves according to requirements;
6. The accuracy values involved in KRACHT are approved by DKD (German Metrology Bureau).
一般特性:
Design gear motor
Connection type: Plate installation/Pipe connection
Installation location is arbitrary
Flow direction in both directions
Viscosity 1-1000000 mm2/s, varies among different series

Large pressure drop Δ pmax -16 bar


AS8-U-230 Clark Indicator in Large Stock

Clark AS8 IndicatorCommon models:
POWER indicator AS8-1-24-ZM
POWER indicator AS8-I-230
POWER indicator AS8-I-24
POWER indicator AS8-I-24-ZM
POWER indicator AS8-U-230
POWER indicator AS8U230/F
POWER indicator AS8-U-230/F
POWER indicator AS8-U-230-F
POWER indicator AS8-U-24
POWER indicator AS8U24/F
POWER indicator AS8-U-24/F
POWER indicator AS8-U-24ZM/F