ANX3750 static blade adjustable axial flow fan

NegotiableUpdate on 04/30

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Product Description: The ANX3750 static blade adjustable axial flow fan has adjustable static blades, which means that the fan adjusts the air pressure and volume through the inlet guide vanes during operation. The structure of the fan is relatively simple, with a lower rotational speed than the adjustable axial flow fan with moving blades. Both the structure and performance are between the adjustable axial flow fan with moving blades and the centrifugal fan. The static blade adjustable axial flow fan can improve the performance of the fan by changing the inlet conditions of the impeller with the help of an inlet guide vane. Negative pre rotation can also be achieved by adjusting in the opposite direction within a certain range to improve the performance of the fan. Static blade adjustable axial flow fan efficiency

Product Details

ANX3750Static blade adjustable axial flow fan

Adjustable static blades refer to the use of inlet guide vanes to adjust the wind pressure and volume during operation of the fan. The structure of the fan is relatively simple, with a lower rotational speed than the adjustable axial flow fan with moving blades. Both the structure and performance are between the adjustable axial flow fan with moving blades and the centrifugal fan. The static blade adjustable axial flow fan can improve the performance of the fan by changing the inlet conditions of the impeller with the help of an inlet guide vane. Negative pre rotation can also be achieved by adjusting in the opposite direction within a certain range to improve the performance of the fan.

The efficiency curve of a static blade adjustable axial flow fan is approximately circular, and the high-efficiency range of the fan operation is between that of a dynamic blade adjustable axial flow fan and a centrifugal fan. When the fan operates at TB point and BMCR condition, it can achieve high efficiency. On boiler units with basic load and appropriate peak shaving, its power consumption is not much different from that of dynamic regulating fans. When the unit frequently operates at low loads, the decrease in fan efficiency is greater than that of a dynamic blade adjustable axial flow fan. The static adjustment fan is limited by its characteristics, and the efficiency of the fan's small device will not exceed 86.5%. AN

The linear velocity of the outer edge of the rotor of the static regulating fan is lower, and its adaptability to the inlet dust content is better than that of the dynamic regulating fan. When the dust content is below 400mg/Nm, the blade life exceeds 20000 hours. The structure of the static adjustment fan is relatively simple and requires less maintenance. The rear guide vanes are the main wear-resistant parts, usually designed to be detachable and easy to replace. At the same time, after 1-2 major maintenance periods, the impeller blades can be replaced 3-4 times on the original hub, further extending the life of the impeller.

The static regulating fan adopts rolling bearing grease lubrication, the bearing seat adopts forced ventilation cooling, and the electric regulating mechanism. Compared with the oil station lubrication and hydraulic regulation of the dynamic regulating fan, the operation and maintenance cost is lower.

Dust removal fan, high-temperature fan, boiler induced draft fan, desulfurization and denitrification fan, centrifugal fan should identify the "Xima fan". Professional manufacturer of centrifugal fans, ensuring product quality and complete specifications!

For more specifications and price details of centrifugal fans, please consult Manager Wang