AIRCOM pressure gauge MHA-A5P

AIRCOM pressure gauge MHA-A5P

Product Features

In terms of accuracy: With a sensitivity of 2mbar, it can perform measurement work with relatively high precision.

Applicable medium: Suitable for compressed air or non corrosive gases.

Gas supply pressure: maximum value is 10 bar.

Adjustment method: Adjust through the release function of the handwheel with anti loosening nut.

Valve body material: aluminum die-casting; The elastomer is NBR/Buna-N; The materials of the valve include stainless steel, brass, aluminum, and steel.

Air consumption: There is no constant release of air.

AIRCOM MHA-A5P features and performance related characteristics

There is no constant deflation phenomenon in terms of air consumption, which helps to save gas resources and indirectly reflects the effective utilization of gas pressure by equipment. This is particularly important in some scenarios where continuous pressure control is required and gas resources are relatively valuable. For example, in outdoor gas filling equipment or some portable pressure control equipment, the effective working time of the equipment can be extended after a single inflation.

Adjustment is achieved through the release function of the handwheel with a locking nut. Through handwheel adjustment, operators can accurately control the release or adjustment of pressure values according to the actual situation. The locking nut can lock the handwheel position after adjustment, avoiding changes in the adjusted pressure caused by vibration or other factors during equipment operation. This design can effectively ensure the stability of the adjusted pressure in industrial equipment installation environments with strong vibration, such as oil extraction equipment areas or on-board equipment of large transport vehicles.

High precision diaphragm pressure regulator, with large flow rate and zero closure (requiring back pressure), high precision requirements have been mentioned earlier. The characteristic of large flow rate makes it very suitable for some industrial processes that require processing large gas flow rates and simultaneously completing pressure regulation. For example, in large-scale chemical gas production pipeline systems, it can accurately regulate pressure while meeting the requirements of high flow gas passing through pressure regulating equipment; The characteristic of zero closure but requiring back pressure indicates that in some cases, even when the valve is in the closed position, a certain back pressure may still be needed to ensure the stability and sealing of the equipment. This requires consideration of the provision of back pressure in pipeline system design, such as in some complex industrial pipeline networks involving the design of pressure difference before and after valves and the connection of related pressure feedback control systems.

Suitable for various conditions, with compressed air or non corrosive gas as the medium, and a maximum supply pressure of 10 bar; The installation location is not limited and can operate normally in ambient temperatures ranging from 0 ° C to 90 ° C/32 ° F to 194 ° F, and is suitable for compressed air environments with temperatures as low as -40 ° C/-40 ° F that have been appropriately adjusted. This wide range of applicability allows it to be used in various industrial scenarios, whether it is near small air pumps in cold outdoor environments or large air compressors in warm indoor environments. As long as the medium is non corrosive gas and the supply pressure does not exceed 10 bar, and the temperature is within the appropriate range, it can work normally.

AIRCOM pressure gauge MHA-A5P