AD0912UX-A7BGL Axial Blower AD0912UX-A7BGL

AD0912UX-A7BGL Axial Flow FanThe product is designed with double ball bearings, and its advantages include low noise, high air volume, and long service life

Brand: Xiexi ADDA

Manufacturer: ADDA Corporation, Taiwan

Size: 90 * 90 * 25mm

Bearing: Hypro Bearing

Speed: 3800 revolutions per minute (* at high speeds) (can be flexibly adjusted between 400 and 3800 revolutions per minute using a speed controller)

Airflow: 79.3 CFM (* at high speed)

Noise: 40.3 dBA (* at high speed)

Voltage: 12V

Current: 0.50A

Interface: 4pin (supports PWM temperature control and speed measurement)

Speed measurement: Supports

Line length: approximately 25 centimeters

Applicable: CPU heatsink, chassis heat dissipation, and other multi platform applications

The altitude shall not exceed 2000 meters, the surrounding air temperature shall not be higher than+40 ℃, not lower than -5 ℃, and the average temperature within 24 hours shall not exceed+35 ℃.
The installation location has clean air, and the relative humidity of the atmosphere should not exceed 50% when the ambient temperature is 40 ℃. The average relative humidity in humid months is 90% when the average temperature is 25 ℃, taking into account the condensation that occurs on the surface of the product due to temperature changes.
Note: In order to facilitate the maintenance and updating of existing electrical equipment for users, a special design has been made to useAD0912UX-A7BGLAxial flow fanreplace
If you wish to learn moreAD0912UX-A7BGLAxial flow fanFor details such as product specifications, prices, maintenance and replacement, please contact us.