A large number of Kracht flow meters VC0.025K2F3R2VH

NegotiableUpdate on 05/10

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

What are the hazards of hydraulic impact on a large number of Kracht flow meters VC0.025K2F3R2VH $r $n? When hydraulic shock occurs, the instantaneous pressure peak of the system is usually 4-5 times the working pressure, which can cause equipment vibration and noise in mild cases, damage hydraulic components, sealing devices, and even pipe bursts in severe cases. What are the measures to reduce and prevent hydraulic shock in $r $n?

Product Details

A large number of Kracht flow meters VC0.025K2F3R2VH

What are the hazards of hydraulic shock?

When hydraulic shock occurs, the instantaneous pressure peak of the system is usually 4-5 times the working pressure, which can cause equipment vibration and noise in mild cases, damage hydraulic components, sealing devices, and even pipe bursts in severe cases.

What are the measures to reduce and prevent hydraulic shock?

1. Slowly open and close the valve to reduce the intensity of the shock wave. For example, try to extend the switching time of the solenoid valve as much as possible without affecting the normal operation of the system.

2. Limit the flow rate of liquid in the pipeline.

3. Install hydraulic buffering devices in hydraulic components, such as throttling elements for hydraulic directional valves and buffering devices for hydraulic cylinders.

4. In areas where hydraulic shock is prone to occur in the pipeline, an accumulator should be installed to reduce the distance of shock wave propagation.

A large number of Kracht flow meters VC0.025K2F3R2VH

Practical application of reducing hydraulic shock

1. The application of shock absorbers is actually to install buffering devices in hydraulic cylinders. Let's take a look at the following video.

2. In hydraulic systems with hydraulic motors as the executing component, when it is necessary to control the hydraulic motor to suddenly stop, the motor cannot immediately stop moving due to the inertia of the load. At this point, hydraulic shock will occur. In practical applications, we will set up two overflow valves to reduce impact.

The use of KRACHT flowmeter in equipment:

大量kracht流量计VC0.025K2F3R2VH