9-26 series desulfurization and denitrification dilution fan

1、 Fan form:

The air volume of the 9-26 high-pressure centrifugal fan is 2473-102324 ㎥/h, the air pressure is 3876-10618Pa, and the power is 2.2kw-400kw. This fan is a single suction type, with 15 machine numbers including NO.4A, 4.5A, 5A, 5.6A, 6.3A, 7.1D, 8D, 9D, 10D, 11.2D, 12.5D, 11D, 16D, 18D, and 20D. When the above machine numbers cannot meet your needs, we have the ability to design according to your needs,To learn more, click to consult(To provide you with a cost-effective solution).

2、 Details introduction:

The 9-26 high-pressure centrifugal fan is generally used for forging furnaces and high-pressure forced ventilation, and can be widely used for conveying materials, conveying air, and gases that are non corrosive, non self igniting, and do not contain viscous substances. The temperature of the medium generally does not exceed 80 ℃, and the dust and hard particles contained in the medium do not exceed 150mg/m ³. For the transportation of flammable and explosive gases, the impeller can be made of aluminum alloy to prevent sparks during operation. The motor used is an explosion-proof motor with the same performance parameters as ordinary motors. This type of fan has high efficiency, low noise, flat performance curve, and a wide high-efficiency zone.

3、 Product features:

1. It can output higher gas pressure and provide more gas flow at the same time, with lower noise.

2. When using an integral bracket, installation is very simple and requires little support from professional technicians.

3. The motor shaft is elastically connected to the transmission shaft, and there is no need to frequently tighten or replace the belt, resulting in low maintenance workload.

4. Fan systems with impeller diameters below 1400mm that operate at room temperature do not require additional bearing cooling devices, reducing user investment and maintenance workload.

5. When the airflow resistance increases, the motor load will automatically decrease without burning out the motor.

6. Made of high-quality carbon steel, stainless steel or other metal materials can also be used according to user requirements.

7. After production is completed, it has undergone operational testing and vibration value detection, ensuring reliable operation.

Dust removal fan, high-temperature fan, boiler induced draft fan, desulfurization and denitrification fan, centrifugal fan should identify the "Xima fan". Professional manufacturer of centrifugal fans, ensuring product quality and complete specifications! For more specifications and price details of centrifugal fans, please consult Manager Wang