8-39 series high-temperature fan

1、 Fan form:

The air volume of the 8-39 series boiler centrifugal fan is 4451-315984 ㎥/h, the air pressure is 2202-13840Pa, and the power is 5.5kw-250kw. This fan is designed as a single suction system and has thirteen machine numbers: No. 4, No. 4.5, No. 5, No. 5.6, No. 6.3, No. 7.1, No. 8, No. 9, No. 10, No. 11.2, No. 12.5, No. 14, and No. 16. Learn more and click to consult (to provide you with cost-effective solutions).

2、 Details introduction:

The 8-39 type strong air cooler is a high-efficiency product jointly designed by the fan energy-saving group of the Ministry of Machinery Industry, organized by renowned experts in the fan industry, and promoted by the Ministry of Machinery Industry. It has the advantages of high efficiency, low noise, and a wide high-efficiency range of performance curves, in order to work in the high-efficiency zone during variable operating conditions and achieve energy conservation. Industrial boilers with a capacity of 5-35 tons/hour can be selected for those with similar inlet conditions and suitable performance, but the high temperature should not exceed 250 ℃. A dust removal device with a dust removal efficiency of not less than 85% must be installed before the induced draft fan to reduce the dust content of the flue gas entering the fan. This not only reduces the pollution of the flue gas to the environment, but also reduces the wear and tear of the fan caused by smoke and dust, which is beneficial for extending the life of the fan.

threeProduct features:

1. It can output higher gas pressure and provide more gas flow at the same time, with lower noise.

2. When using an integral bracket, installation is very simple and requires little support from professional technicians.

3. The motor shaft is elastically connected to the transmission shaft, and there is no need to frequently tighten or replace the belt, resulting in low maintenance workload.

4. Fan systems with impeller diameters below 1400mm that operate at room temperature do not require additional bearing cooling devices, reducing user investment and maintenance workload.

5. When the airflow resistance increases, the motor load will automatically decrease without burning out the motor.

6. Made of high-quality carbon steel, stainless steel or other metal materials can also be used according to user requirements.

7. After production is completed, it has undergone operational testing and vibration value detection, ensuring reliable operation.

Dust removal fan, high-temperature fan, boiler induced draft fan, desulfurization and denitrification fan, centrifugal fan should identify the "Xima fan". Professional manufacturer of centrifugal fans, ensuring product quality and complete specifications! For more specifications and price details of centrifugal fans, please consult Manager Wang