6-51 series waste heat circulating fluidized bed boiler fan

1、 Fan form:

The air volume of the 6-51 series centrifugal induced draft fan is 2752-498507 cubic meters per hour, the air pressure is 1706-8265Pa, the power is 18.5kw-2000kw, and the supply fan and induced draft mechanism are in a single suction form. There are 21 machine numbers from No. 8 to 31.5F, totaling 42 specifications. The fan transmission method is F-type (i.e. double support structure), and the motor is connected to the fan using elastic couplings for direct transmission. The full name of the product is as follows: G6-51 No.1 No.20F, right 45 degrees/135 degrees, where G and Y respectively represent the boiler air supply fan and boiler induced draft fan, 5 is the pressure coefficient of the high-efficiency point multiplied by 10, 51 is the specific speed, 1 is the * design, and No.20 represents the impeller diameter of 2000mm. Learn more and click to consult "(to provide you with cost-effective solutions).

2、 Details introduction:

The 6-51 type boiler induced draft fan is mainly used for the induced draft fan system of 2t/h~670t/h steam boilers in thermal power plants, and also meets the requirements of high pressure head performance parameters for fluidized bed boilers. This series of fans can also be used for dust removal, mine ventilation, and general ventilation systems. The medium conveyed by the air supply fan is air, while the medium conveyed by the induced draft fan is flue gas or gas containing impurity particles. When the impurity concentration is less than 200mg/m3, it can be used for more than four years. If it contains high impurities, it can also be used, but the service life is relatively shortened. The temperature used for the induced draft fan shall not exceed 250 ℃. And it has the characteristics of high efficiency and low noise, making it a centrifugal fan product series with a wide performance range.

3、 Product features:

1. The design of this series of fans is based on the aerodynamic sketch that has been finalized through more than a year of model testing, and adopts high-strength wear-resistant impellers and leak proof oil

Advanced proprietary technology achievements such as bearing housings.

2. Wide range of efficient operating conditions, dense arrangement of machine numbers, and easy selection of efficient operating points.

3. High strength wear-resistant impeller

4. The fan is assembled as a whole or separately

5. The fan is fully equipped with supporting facilities

6. Provide complete relevant parameters

7. The fan is easy to install and maintain

7. The fan is easy to install and maintain

Dust removal fan, high-temperature fan, boiler induced draft fan, desulfurization and denitrification fan, centrifugal fan should identify the "Xima fan". Professional manufacturer of centrifugal fans, ensuring product quality and complete specifications!For more specifications and price details of centrifugal fanspleaseConsultation: Manager Wang