5000 type amphibious multifunctional floating tracked mobile pump station

Ao Yi5000 type amphibious multifunctional floating tracked mobile pump stationAdopting the portable cylindrical bottom suction submersible electric pump and permanent magnet synchronous variable frequency control cabinet control method from Aoyi Company, the efficiency is high, and the flow rate and head are better;

1. The water pump cable and hose are both connected by quick connect method, which can be connected to the power supply of the generator set and the power grid. It has high emergency response efficiency and can operate continuously and stably for a long time.

2. The Aoyi drainage unit is equipped with a certified copyright software control system, using a frequency converter controller, which can achieve stepless speed regulation (flow rate adjustment) during use, as well as automatic identification, power-off, and protection functions under various safety hazards (such as cable damage, debris blockage overload, and dry pumping without water), fundamentally eliminating safety accidents for operators and equipment;

Product Features:

Power and drive aspects

Flexible power source: It can be driven by a diesel generator set or connected to the municipal power grid. In outdoor or emergency situations without municipal power supply, the diesel generator set can independently supply power to ensure the operation of the pump station; In areas with municipal power grids, connecting to the grid can reduce operating costs.

Crawler walking advantage

Hydraulic driven track walking, with strong driving force, can be remotely operated to move flexibly in complex terrain such as rivers and other environments.

In terms of drainage performance

High flow drainage: Equipped with a 5000 cubic meter per hour high flow drainage pump, it can quickly and effectively discharge a large amount of accumulated water, and respond to emergency drainage needs such as urban waterlogging and agricultural floods.

High head guarantee: The 10 meter head design enables it to meet the drainage requirements of a certain height difference, and can lift water from low-lying water accumulation areas to higher drainage points or pipelines, suitable for various drainage scenarios.

Applicable and operational aspects

Wide applicability: Suitable for various scenarios such as urban flood control, agricultural drought resistance, municipal engineering, emergency drainage, etc.

Convenient operation: The overall operation is lightweight and practical, equipped with an integrated control system that can achieve functions such as one click quick start and remote control.

Usage conditions:

1. It can be used in freshwater bodies such as rivers, lakes, and reservoirs. For water bodies with a lot of floating debris and garbage accumulation, it is necessary to clean the surrounding environment before use,

Avoid debris entangling the tracks and blocking the water pump inlet. Can adapt to riverbanks with a certain slope, but the slope must be less than 30 ° to avoid tipping over.

2. Ensure sufficient diesel and electricity supply, while ensuring that the floating tank has sufficient draft depth, and try to avoid environments containing large amounts of corrosive substances as much as possible

use.

Operation Instructions:

1. First, turn the knife switch downwards on the right side until it opens, and then turn the key to the right to open it.

2. Then take out the remote control.

3. First press the power button ⑦, and you will see the red light flashing. Then press the green start button ⑧ on the left, and both green lights will flash at the same time. Then press the middle button ⑨ on the right to start.

4. Then move the middle button ④ forward to automatically move forward with one key. If you want to pause driving, press the return button. Move the middle button ④ backward to automatically move backward with one key. If you want to pause driving, press the return button.

5. Simultaneously press and hold the outermost left and right buttons ① and ⑥ to manually move forward, and release the return button when pausing; Simultaneously press and hold the outermost left and right buttons ① and ⑥ to manually reverse, and release the return button when pausing.

6. Long press the ⑥ button on the right side to move forward, and the ① button on the left side to move backward, to turn left. If you need to pause, release the return button; Long press the left button ① forward and the right button ⑥ backward to turn right. If you need to pause, release the return button;

7. When floating on the water, simultaneously move the two buttons ② and ⑤ in the middle forward or backward to manually control the forward and backward movement of the underwater thruster. To pause, simply press the return button. By simply pressing the left middle button ③ forward or backward, the underwater thruster can be automatically controlled to move forward and backward. To pause, simply press the return button.

8. In case of emergency, press the red stop button on the right side ⑪.

9. When used in low light environments, you can move the second lever at the bottom of the remote control to turn on the lighting forward.

10. To stop the machine, please press the white stop button ⑩ at the bottom of the right side, then click the white power button ⑦ on the left side, turn off the remote control, turn off the indicator light, put away the remote control, and then turn the key to the left to turn off. Turn the knife switch to the off position to complete the parking.

5000 type amphibious multifunctional floating tracked mobile pump stationEngineering Case：

Technical Specifications：