45kw electric water heater

45kw electric water heatercharacteristics

Efficient and energy-saving: The heating technology used has the characteristics of high efficiency and energy saving. It uses electricity as its energy source to quickly provide hot water through electric heating, saving energy consumption.

Stable and reliable: It has stable and reliable operational performance. It is equipped with an intelligent control system that can accurately control the water temperature and ensure a stable supply of hot water.

Safety and Environmental Protection: Using electricity as energy, without burning fuel, does not produce exhaust gas and waste residue, and is environmentally friendly. At the same time, it is also equipped with various safety protection devices, such as overheating protection, overpressure protection, and leakage protection, to ensure safe use.

working principle

Heating element: There are heating elements inside, usually using electric heating tubes or electric heating plates for heating. When current passes through the heating element, a large amount of heat energy is generated, causing the surrounding water temperature to rise.

Control System: Equipped with a microcomputer intelligent control system, it monitors water temperature through sensors and controls heating elements based on set temperature parameters. When the water temperature is lower than the set value, the control system automatically starts the heating element to raise the water temperature; When the water temperature reaches the set value, the control system stops heating.

Circulating system: It is also equipped with a circulating pump and a water pump. The cold water is heated by the heating element through the water pump, and the hot water is supplied to the usage point through the circulating pump to ensure continuous supply of hot water.

Product physical image and user on-site installation diagram:

45kw electric water heaterInstallation precautions

Installation location: When installing, choose a well ventilated, dry, and clean indoor location, away from flammable and explosive materials, as well as corrosive substances such as acid and alkali.

Power connection: When connecting the power supply, it is necessary to wire it according to the rated power and voltage requirements, and ensure that the wiring is firm and reliable to prevent circuit faults or electric shock accidents.

Water pipe connection: Connect the cold and hot water pipes correctly to the chimney to prevent smoke accumulation and unpleasant odors.

Pressure relief device: A pressure relief device needs to be installed during installation to prevent equipment and pipeline damage caused by overpressure inside the water heater.

　　45kw electric water heaterDaily maintenance

Cleaning and maintenance: Regularly clean the exterior and interior, remove scale, dirt, and debris. Special cleaning agents can be used for cleaning to ensure the cleanliness and hygiene of the equipment.

Check the heating element: Regularly check the working status of the heating element to ensure its normal operation. If the heating tube or electric heating plate is found to be broken, aged, or damaged, it needs to be replaced in a timely manner.

Check the control system: Regularly check whether the control system is working properly, including temperature sensors, controllers, relays, etc. If there are any abnormal situations, the faulty components should be repaired or replaced in a timely manner.

Check the water pump and circulation pump: Regularly check the working status of the water pump and circulation pump to ensure their normal operation. If problems such as noise, water leakage, or unstable operation are found, repair or replacement should be carried out.

Cleaning the filter: Regularly clean the filter at the inlet of the water pump and circulation pump to prevent debris from blocking the waterway, affecting the water supply flow and hot water quality.

Check safety protection devices: Regularly inspect and test the reliability of safety protection devices, including overheating protection, overpressure protection, leakage protection, etc. If any malfunction or failure is found, it should be repaired or replaced immediately.

Pay attention to electrical safety: During use, pay attention to electrical safety, ensure good power wiring, do not privately pull or randomly connect power lines, and avoid overload operation and electrical faults.

Antifreeze measures: When used in cold regions, antifreeze measures should be taken, such as using antifreeze or other insulation measures, to prevent water pipes and equipment from freezing and breaking.