40W maintenance free explosion-proof LED floodlight quotation 80W

Technical Specifications:40W maintenance free explosion-proof LED floodlight quotation 80W

Explosion proof mark: Exdemb II CT4
Rated voltage: AC220V 50HZ
Rated power: 20W, 30W, 40W
Power factor: 0.98
Luminous flux: 5500~13200LM
Protection level: IP66
Anti corrosion grade: WF2
Introduction device: G3/4 'introduction port specification, suitable for cables ranging from Φ 8m to Φ 12m
Wiring terminal: Reliable connection of ≤ 2.5mm2 wire
Lamp size: 240 * 200 * 135mm
Whole lamp weight: 4KG

Product advantages:40W maintenance free explosion-proof LED floodlight quotation 80W
1. All the light source circuits of the lamps produced by our company are equipped with yellow wax tubes. This process can effectively prevent short circuits in the lamps, better ensure the quality of the lamps, and extend their service life;
2. The lamps and lanterns are all equipped with abrasive foam, so that the damage of lamps and lanterns can be avoided during transportation, reducing unnecessary troubles for both parties;
3. All the surfaces of our company's lighting fixtures have undergone electrostatic spraying treatment, resulting in smooth and burr free surfaces, a bright appearance, and a refreshing feeling;
4. All lamp connectors use terminal blocks to avoid some avoidable problems such as leakage and short circuits;
5. All fixed lighting fixtures of the company are guaranteed for 7 years, the light source is guaranteed for 1.5 years, and the complete set of LED fixtures is guaranteed for 3 years. You can rest assured in after-sales service;
6. Brand lighting fixtures, you can purchase with confidence and enjoy after-sales service with peace of mind!

Product Features
1. Optical system features: Imported chips are preferred, which have excellent light maintenance rate and high light efficiency. By adopting surface mount technology (SMT), the thermal conductivity is significantly improved. Carefully designed honeycomb shaped light distribution structure effectively improves the efficiency of lighting fixtures.
2. Characteristics of the drive system: It adopts constant current drive and has short-circuit and overvoltage protection functions. It has excellent electromagnetic compatibility and will not cause any interference to other electrical appliances or output networks. The power supply itself has excellent resistance to electromagnetic interference. Featuring wide voltage compatibility, with a tolerance of 20% for voltage fluctuations. The drive power supply adopts adhesive sealing technology to ensure that the components are not corroded.
3. Characteristics of the cooling system: The spiritual design of the three chamber independent structure ensures stable operation of various electronic components. Carefully designed heat dissipation ducts with air guiding structures ensure the longevity of LED light sources. Carefully designed independent power supply structure, the power supply is not affected by LED heat, ensuring stable and long-lasting operation.
4. Characteristics of the whole lamp structure: Adopting IIC explosion-proof structure and IP66 protection level, it has excellent explosion-proof protection performance. Adopting high borosilicate tempered glass, it can withstand high-energy impacts. All exposed fasteners and accessories are made of stainless steel material with high anti-corrosion performance.

LED explosion-proof emergency floodlight suspension rod light

Nowadays, many people are using LED beads with simulated lumens. You can check the specifications of the beads and find that the temperature at the center point of the bead is about 15 degrees higher than the outside temperature during operation. If there is a temperature of 55 degrees on the shell, the temperature at the center point of the bead will be about 70 degrees. If you use the Kerui 3535 beads and check the specifications, you will find that the temperature at the center point of the bead is only about 5 degrees higher than the outside temperature during operation. Therefore, for the same shell, the same accessories, different beads, the temperature of the LED bead center point chip will be about 10 degrees lower. When selecting lighting fixtures for different places, it is necessary to choose according to the location of use. Explosion proof fixtures must be used in hazardous areas. If we use ordinary fixtures in hazardous areas, it may cause irreversible accidents and disastrous consequences. So in dangerous places, we need to use LED energy-saving and explosion-proof lights.

Firstly, explosion-proof products are not individual pieces or a specific series. For exampleLED explosion-proof lampExplosion proof products, also known as explosion-proof electrical, are an industry that is divided into high and low voltage, essentially no different from traditional high and low voltage electrical appliances,LED explosion-proof lampUsually, it is to install ordinary civilian electrical components into explosion-proof enclosures, known as explosion-proof chambers in the industry, which can isolate electrical components from hazardous environments. Ordinary gases and dust can affect normal operationLED explosion-proof lampIt will not have any impact and will not ignite the surrounding flammable and explosive media, such as chemical plants, mines, oil fields, oil platforms, gas stations, etc. These are mandatory equipment required by the stateLED explosion-proof lampThe place.

The chemical content in the air of gas stations is very high, so the explosion-proof performance requirements for explosion-proof lamps are also very high. So I am honored to receive an order from a PetroChina gas station in the past few days, which shows that they have a relatively high recognition of our product's explosion-proof and safety performance.
This gas station has a relatively large scale and ordered 10 100W silver white LED explosion-proof floodlights. The color selection also took some effort, but later chose silver white because customers felt that silver was simple and elegant, and the overall effect was very coordinated when installed in their gas station.
They had already seen the explosion-proof performance of our lighting fixtures on our website before coming to purchase them. We know that the selection and production of our lighting fixtures have high requirements. The chips used are high-quality imported chips from abroad, the shell is made of die cast aluminum, and the lampshade is made of tempered glass. The entire lighting fixture not only meets the safety and protection requirements of their gas station, but also has a corrosion resistance level of WF2. The lighting fixture will not rust or be scrapped. And he learned from the reviews of other customers that our lighting fixtures have good energy efficiency. Many customers who use our lighting fixtures say that they can save about 7-8 times more energy than ordinary lighting fixtures after using our explosion-proof lamps.
At the beginning, he was not quite sure about the specifications of the lighting fixtures when he came to purchase them. He initially wanted to buy 10 floodlights with a power of around 70W, but I looked at their gas station photos and estimated that the installation height was about 8-9 meters. The installation height of 70W lighting fixtures may not be enough, so he later adopted my suggestion and changed to 100W lighting fixtures.
Yesterday they received the lighting fixtures, and he immediately had them installed. After installation, he showed me the effect of the photos. When I looked at the photo, he installed a total of four rows, with three lights per row in the middle two rows and two lights per row next to them. The customer told me that thanks to my advice, the brightness of the lighting fixtures is just right now, and the LED light of our fixtures is very soft. The gas station staff said it's not as irritating as before, and it's also much more stable. There won't be flickering like the previous fixtures.
We are glad that our lighting fixtures have gained a lot of recognition in all aspects, and we will continue to work hard for this.

According to different heights of gas stations, explosion-proof lights of different powers will be selected. Please refer to the information below for details:
Used for 6-meter gas stationsLED explosion-proof lamp80w
Used for 7-meter gas stationsLED explosion-proof lamp80w
Used for 8-meter gas stationsLED explosion-proof lamp100w
Used for 9-meter gas stationsLED explosion-proof lamp100w
Used for 10 meter gas stationsLED explosion-proof lamp110w
Used for a 12 meter gas stationLED explosion-proof lamp130w
Used for a 14 meter gas stationLED explosion-proof lamp150w
Used for a 15 meter gas stationLED explosion-proof lamp160w
Used for a 16 meter gas stationLED explosion-proof lamp200w
In today's rapidly developing technology, the quality requirements for lighting fixtures are no longer just about being able to light up as before. In some gas stations, paint shops, chemical plant workshops, and wheel polishing workshops, there are high requirements for explosion-proof technology of lighting fixtures. Explosion proof lamps isolate the lamp beads from dust lamps in the air, avoiding the occurrence of safety accidents.
Our 50W LED explosion-proof floodlight is suitable for hazardous areas such as Zone 1, Zone 2, IIA, and IIB in gas environments, as well as various lighting industries such as coal mines, petroleum, and railways. When designing, we also considered the diversity of lighting installation in various locations, such as wall mounted, ceiling mounted, street lamp, and guardrail flanges. Customers can choose the specific installation method according to their own company's work and production environment. There are also various colors available, such as golden yellow, gray, and earthy yellow, with a wide range of choices.
In addition to its design, the quality and performance of this lamp also stand the test of time. The shell of the explosion-proof lamp is made of die cast aluminum, which has strong impact resistance. The lampshade of the 50W LED explosion-proof floodlight is made of high-strength tempered glass, and a wire mesh cover or stainless steel mesh cover can be added according to the customer's requirements. The driving power supply adopts adhesive sealing technology, and the shell has good corrosion resistance, reaching WF2. The chip adopts excellent imported chips with good protection performance, and its protection level is IP65.
The safety factor of this product is very good, not only because the lamp has strong explosion-proof performance, but also because it has safety design such as short circuit and overvoltage protection functions, as well as good thermal conductivity, which can ensure the safety of the lamp and its entire lighting environment in case of emergencies.
Energy conservation and environmental protection are another highlight of this product. The lamp adopts LED beads, which have the advantages of high electro-optical conversion efficiency, low heat generation rate, low power consumption, and long service life. At the same time, it is carefully designed with a honeycomb shaped compensation structure, which can effectively improve the efficiency of 50W LED explosion-proof floodlights. Under similar light brightness, its power is reduced by more than 80%, saving more than 80% of electricity, and the service life of LED lights is increased by more than 20 times. It has increased the service life and also saved a considerable amount of maintenance and update costs.
Our manufacturer will also provide a warranty period of up to three years for the lamp. As long as the malfunction is not caused by human damage, we can provide free repairs.

Kind Reminder:
1. During transportation, the lamps shall be installed in the cartons provided, and foam shall be added for shock absorption
2. When installing lighting fixtures, they should be safely grounded nearby.
3. When in use, there is a certain temperature rise on the surface of the lamp, which is a normal phenomenon; The center temperature of the transparent component is high and should not be touched.
4. The light fixture suddenly goes out during operation and cannot immediately emit light when turned on again, which is a normal phenomenon; After cooling for 10-15 minutes, turn on the switch again to ensure normal lighting; Hot start should be avoided as much as possible to prevent damage or burning of the light bulb.
5. When replacing light bulbs or wiping glass, the power switch must be turned off and wait for the light fixture to cool down before proceeding.
6. When replacing light bulbs, try to choose bulbs of the same model; It is strictly prohibited to change the power of the light bulb at will