4-68 series fan/A type

One Product Introduction

The air volume of the 4-68 centrifugal fan is 1966-194495 cubic meters per hour, the air pressure is 720-6531pa, and the power is 1.1kw-315kw. This fan is designed as a single suction and has the machine number of No. 2.8 A、3.15A、3.55A、4A、4.5A、5A、6.3D、8D、10D、12.5D、14D、16D、6.3C、8C、10C、12.5C、16B、20B There are a total of eighteen types,To learn more, click to consult(To provide you with a cost-effective solution).

2、 Details introduction:

The 4-68 series centrifugal fan is suitable for indoor ventilation and air exchange in general factories and large buildings. It can be used for both gas input and output. The gas transported by the 4-68 fan should mostly be air at a temperature not exceeding 80 ℃ and other gases that are not prone to spontaneous combustion, harmless to the human body, and non corrosive to steel materials. The gas must not contain viscous substances, and the amount of dust and hard particles should not exceed 150mg/m3. It has high flow rate and low noise, and is widely used for building ventilation, material ventilation and drying, air purification and industrial waste gas treatment, industrial dust collectors, air purification and emissions in hazardous working environments (paper production lines, electrolytic aluminum production lines, textile factories...). Boiler and brick kiln blowing, transportation of various gases, transportation of particles/powders/debris/fiber materials, etc.

3、 Product features:

1. Under the condition of meeting pressure requirements, it can output a large gas flow rate with low noise.

2. Choose energy-saving motors (or install motors according to user requirements) for reliable quality and lower energy consumption

3. V-belt drive enables your fan to operate at the appropriate speed. Easy to install, no need for technical support.

4. The airflow channel and impeller have been optimized multiple times, resulting in higher efficiency and energy savings compared to ordinary high flow fans.

5. Made of carbon steel, stainless steel or other metal materials can also be used according to user requirements.

6. The impeller undergoes annealing treatment to eliminate the structural internal stress generated during welding, ensuring that the impeller does not undergo creep and crack formation.

7. After production is completed, all have undergone operational testing and vibration value detection, ensuring reliable operation.

8. Easy to install, no need for technical support.