Product Categories

Shanghai Xinning Thermal Energy Equipment Co., Ltd

E-mail
Phone
Address
No. 6, Liziyuan Business District, Lane 4703, Jiaotong Road, Putuo District, Shanghai

Contact Now

36kw electric water heater

NegotiableUpdate on 05/15

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Instructions for use of 36kw electric water heater: Power connection: When connecting the power supply, it is necessary to wire it according to the rated power and voltage requirements, and ensure that the wiring is firm and reliable to prevent circuit faults or electric shock accidents.

Product Details

36kw electric water heaterCharacteristics

50mm environmentally friendly insulation layer, with a high hot water production rate of up to 96%.

The system is mature, equipped with a temperature controller device, and operates fully automatically.

Closed outlet design to avoid sudden changes in water temperature.

Add a drain valve to the lowest point of the inner cylinder for easy cleaning.

Stainless steel 304 inner liner, ultra long anode rod, anti-corrosion and anti scaling, long service life.

Multiple safety protections such as over temperature, over pressure, anti leakage, and low water level to prevent dry burning.

There are four heating configurations available: single tube/double tube/three tube/four tube, for quick hot water output.

Performance parameters:

Model: NP120-36

Capacity: 120 liters

Power: 36kw

Voltage: 380V

Current: 54A

Work pressure: 0.6Mpa

Heating range: 0-85 degrees Celsius

Outlet diameter: DN50

Inlet diameter: DN50

Number of water outlets: 2

Number of water inlets: 1

T/P valve diameter: DN20

Number of T/P valves: 2

Insulation layer thickness: 50mm

36kw electric water heaterInstructions for use

Power connection: When connecting the power supply, it is necessary to wire it according to the rated power and voltage requirements, and ensure that the wiring is firm and reliable to prevent circuit faults or electric shock accidents.

Temperature setting: Set the appropriate water temperature according to the requirements. Usually equipped with a temperature controller, the water temperature can be adjusted as needed. Please set according to the specific situation, and be careful not to set the water temperature too high to avoid burns or other safety issues.

Water quality requirements: In order to extend the service life, it is recommended to use clean and impurity free tap water or purified water for supply. If there are a large number of impurities, sediment or high hardness in the water, it is recommended to carry out water treatment to reduce damage to the equipment.

Regular cleaning: Regularly clean the exterior and interior, removing scale, dirt, and debris. Special cleaning agents can be used for cleaning to ensure the cleanliness and hygiene of the equipment.

Regular inspection: Regularly check the working status of heating elements, control systems, and safety devices. If problems such as aging of heating elements, malfunction of control systems, or failure of safety devices are found, they should be repaired or replaced in a timely manner.

Maintenance rules

Cleaning the heating tube: Regularly clean the surface of the heating tube to avoid the accumulation of excessive scale that affects heating efficiency. Special cleaning agents can be used for cleaning, but be careful not to scratch the heating tube.

Cleaning the waterway: Regularly check if the waterway is unobstructed, clean the filters at the inlet and outlet to prevent debris from blocking the waterway. If scale or dirt is found, appropriate cleaning agents or acidic solutions can be used for cleaning.

Check the control system: Regularly check the working status of the control system, including temperature sensors, controllers, relays, etc. If there are any abnormal situations, the faulty components should be repaired or replaced in a timely manner.

Check safety protection devices: Regularly inspect and test the reliability of safety protection devices, including overheating protection, overpressure protection, leakage protection, etc. If any malfunction or failure is found, it should be repaired or replaced immediately.

Check power wiring: Regularly check whether the power wiring is firm and reliable to prevent looseness or poor contact. If any problems are found, they should be repaired in a timely manner to ensure electrical safety.

36kw electric water heaterInstallation situation

Installation location: Choose a well ventilated, dry, and clean indoor location for installation, away from flammable, explosive, and corrosive substances. At the same time, it should be ensured that the equipment has sufficient space for maintenance and operation.

Pipeline connection: Connect the cold water pipe and hot water pipe correctly to the inlet and outlet, and ensure that the connection is tight and reliable to prevent water leakage.

Exhaust ventilation: After installation, ensure that the exhaust duct is unobstructed to prevent smoke accumulation and unpleasant odors.

Pressure relief device: A pressure relief device needs to be installed during installation to prevent equipment and pipeline damage caused by overpressure inside the water heater.