3 * 14 meters 120 ton electronic weighing scale 120 ton automotive electronic scale

3 * 14 meters 120 ton electronic weighing scale 120 ton automotive electronic scale

1、 Product alias: Truck scale
2、 Product Introduction: The concrete structure truck scale is a corrosion-resistant scale body composed of steel structure main structure poured with high-grade concrete,
Combined with standard sensors and displays, it can be used for weighing highly corrosive liquids in chemical and other industries, solving the problem of ordinary standards
The problem of short service life of carbon steel structure corroded weighing body. The overall parameters are consistent with the standard U-shaped beam standard.
Applicable occasions: Weighing of corrosive liquids stored mainly in the chemical industry, such as strong acids, strong alkalis, and other waste liquid tankers.
3、 Product features:
The main structure consists of a carbon steel frame and internal steel mesh. After the concrete is poured with the steel mesh, it dries and becomes a corrosion-resistant surface
The transportation cost is lower than that of ordinary carbon steel scales
On site watering requires professional guidance for operation
4、 Product Highlights:
Excellent anti-corrosion ability, long service life, eliminating the problem of steel scale body corrosion and short service life
Low transportation costs
Debugging and installation are convenient and simple

5、 Usage operation:
① This product cannot be overloaded.
② Maintain good weighing habits during use. The weighing vehicle maintains a speed of 5 kilometers per hour and is evenly weighed. Avoid rough behaviors such as rapid weighing and sudden braking, which may result in inaccurate weighing and affect the service life of the truck scale
6、 Usage environment:
① Due to the potential threat of rodent infestations in many usage scenarios, some parts of the electronic platform scale signal line are exposed, so it is necessary to strictly prevent rodent infestations.
Ensure a tough and smooth cement road surface.
Do not install the weighing instrument in places with high voltage and strong electronic interference, and do not use it in places with strong electronic interference and strong vibration.
7、 Maintenance and upkeep:
① When the weighing display controller cannot be used for a long time (such as more than a month), it should be powered on for inspection according to environmental conditions to avoid moisture or other adverse gas erosion that may affect reliability
② It is prohibited to perform arc welding operations on the car scale platform. If arc welding operations must be performed on the scale platform. Please note: Disconnect the signal cable from the weighing display controller. The grounding wire for arc welding must be set near the welded area and firmly contact the scale body. Do not use sensors as part of arc welding.
③ Regularly clean the debris on the sensor and apply butter to the force bearing steel ball of the sensor to prevent rusting or contact with the sensor, which may cause inaccurate weighing or jumping.
④ Regularly clean the soil on the weighing board and pay attention to the hard stones on the scale surface when weighing.
⑤ Regularly check whether the limit clearance is reasonable, and whether the scale body comes into contact or collides with other objects.
⑥ Regularly check whether the drainage pipes are blocked and maintain good drainage.
⑦ Do not forcefully hammer the scale surface with hard objects.
⑧ Do not use flammable materials to clean the instrument. It is strictly prohibited to clean the instrument with strong solvents.
If the weighing display of the electronic car scale malfunctions, it should be quickly powered off. If the cause of the power outage cannot be accurately determined, our professional engineers should be notified for inspection and organization. Users cannot open the chassis at will, nor can they replace internal parts at will.

3 * 14 meters 120 ton electronic weighing scale 120 ton automotive electronic scale