1T flat weight (1 ton weight from Shanghai manufacturer)

1T flat weight (1 ton weight from Shanghai manufacturer)

Shanghai Shirun provides you with cast iron weights, elevator weights, crane counterweights, weighbridge calibration weights, ship counterweights, metrology institute weights, steel mill counterweights, weights ranging from 10T5T2T1T500KG200KG100KG50KG25KG20KG10KG5KG2KG1KG, and more! As long as you think of it, we will try our best to meet your requirements!

Beautiful appearance, high-quality standard weights, precise and durable, attentive quality, various specifications of large, medium and small counterweight iron weights, calibrated weight prices, some in stock, available for purchase by phone!

Weight grade: M1, M2

The internal quality can be adjusted by oneself. When the use time is too long and wear occurs, it is advisable to add lead blocks or other objects inside to increase the weight

There are various sizes and specifications available. Grade: M1 M2 Material: Cast Iron Shape: Lock type, rectangular, cylindrical, square Color: Typically black.

F1 level F2 level and M1 level weights; M1 grade stainless steel standard added weight Hanging ring weights and tension clamp weights, etc. JF-1

The technical specifications of the non-magnetic stainless steel weight are as follows

Weight density: 8.00 ± 0.02g/cm3, weight magnetization:<1.0006;

Weight hardness: Rockwell hardness>40HRC;

Surface roughness of weight: R not less than 0.2um;

Weight quality stability: Within 15 months, the mass change of 1kg weight is greater than

1、 Compliant with JJG99-2022 Weight Calibration Regulations, used for weighing instrument calibration

2、 Material: Cast Iron

3、 Level: M1

4、 Specification: 1000kg/piece, total 37 tons

5、 Surface treatment: environmentally friendly paint coating

6、 Structure: Lock type

7、 Weight quality tolerance: The tolerance is controlled within 1/3 of the normal value required by JJG99-2006 Weight Verification Regulations (if this requirement cannot be met, Party A guarantees to adjust it to the required range)

8、 Stability of Weight Quality: Within 12 months, the weight quality of the weight should meet the requirements of JJG99-2006 Weight Verification Regulations for M1 grade weights

Provide standard weight

Cast iron material -2000kg standard weight

Cast iron material -1000kg standard weight

Cast iron material -500kg standard weight

Cast iron material -200kg standard weight

Cast iron material -100kg standard weight

Cast iron material -50kg standard weight

Cast iron material -25kg standard weight

Cast iron material -20kg standard weight

Cast iron material -10kg standard weight

Cast iron material -5kg standard weight

Cast iron material -2kg standard weight

Cast iron material -1kg standard weight

How to maintain1T flat weight (1 ton weight from Shanghai manufacturer) ——That's the key

1、 Firstly, it is necessary to ensure that the warehouse where the weights are placed is clean and dry, with a certain temperature and humidity.

2、 When storing weights, a wooden board should be placed at the bottom and covered with cloth or film at the top to prevent direct contact with the ground and moisture and rust.

3、 To carry out daily inspection and maintenance work, regularly observe and record Daily maintenance is much more important than one-time maintenance that is left unused for a long time. To prevent the further spread of rust on the surface of the weights, the cleaning should be repeated with cotton yarn dipped in engine oil until the surface is shiny.

4、 Regularly check the accuracy of the weights afterwards, use a higher precision balance to weigh the processed weights, calculate the reduced mass, unscrew the screws on the weights, make up for it with tin wire, and then tighten the screws to prevent the weights from being inaccurate during use.