The 1550 butterfly amplifier SOA semiconductor optical amplifier (SOA) series products are mainly used for optical signal amplification and can significantly improve output power. The product has the characteristics of high gain, low power consumption, and low polarization correlation, and the chip is self owned. The entire process is domestically controllable. This series of products adopts sealed standard butterfly packaging and can provide customized services.
1550蝶形放大器SOA
1550蝶形放大器SOAThe semiconductor optical amplifier (SOA) series products are mainly used for optical signal amplification, which can significantly improve output power. The product has the characteristics of high gain, low power consumption, and low polarization correlation, and the chip is self owned. The entire process is domestically controllable. This series of products adopts sealed standard butterfly packaging and can provide customized services.
Product Application:
In distributed fiber optic sensing systems, replacing acousto-optic modulators as modulators/Chopper
In broadband light sources, such as fiber Bragg grating demodulator broadband light sources
In optical communication systems, achieving 1550 Wavelength optical signal amplification, replacement part EDFA
Combined with narrow linewidth lasers for wind measurement radar, space light detection, and space light communication MOPAlaser
Performance parameters:
parameter |
symbol |
working conditions |
minimum |
typical value |
maximum |
unit |
ASE center wavelength |
λASE |
25℃,If=250mA |
--- |
1515 |
--- |
nm |
operating wavelength |
λ |
25℃,Pin=0dBm |
--- |
1550 |
--- |
nm |
-3dB gain spectral width |
[UNK]965151λ |
Pin=0dBm |
100 |
--- |
--- |
nm |
Maximum optical power |
Pmax |
If=250mA,Pin= 5dBm@1550nm |
12 |
--- |
15 |
dBm |
Small signal gain |
SSG |
If=250mA,Pin= -25dBm@1550nm |
|
30 |
--- |
dB |
Polarization related gain |
PDG |
25℃,If=250mA |
--- |
1.0 |
2.0 |
dB |
Noise Figure |
NF |
25℃,If= 250mA@1550nm |
--- |
7 |
9 |
dB |
operating current |
If |
--- |
--- |
250 |
400 |
mA |
Forward voltage |
VF |
--- |
--- |
1.3 |
1.5 |
V |
Turn off extinction ratio1 |
ER |
If=250mA/If=0mA,Pin=0dBm |
--- |
50 |
--- |
dB |
Turn off extinction ratio2 |
ER |
If=250mA/If=-5mA,Pin=0dBm |
--- |
70 |
--- |
dB |
TEC current |
ITEC |
--- |
--- |
--- |
1.8 |
A |
TEC voltage |
VTEC |
--- |
--- |
--- |
3.4 |
V |
Thermistor resistance value |
Rtherm |
T=25℃ |
9.5 |
10 |
10.5 |
kΩ |
Thermistor current |
Itherm |
--- |
--- |
--- |
5 |
mA |
airtightness |
|
T=25℃ |
1*10-12 |
1*10-11 |
1/10-8 |
Pam3/s |
Operating Temperature |
TC |
I=Iop |
-10 |
--- |
70 |
℃ |
Storage temperature |
Tstg |
--- |
|
--- |
85 |
℃ |
Total Power Consumption |
P |
--- |
--- |
--- |
4 |
W |
Note 1: The airtightness value is the packaging value of the tube shell, which is obtained by excluding residual interference from the outside of the tube shell during testing.