1200 ℃ hot press sintering furnace

NegotiableUpdate on 01/27

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

MFLHP444-12 is a hot press sintering furnace with a maximum temperature of 1200 ℃, which can provide precise pneumatic constant pressure control and a maximum pressure of 1.5KN (replaceable cylinder power components can be used to increase the maximum pressure). It can be used for SOFC constant pressure compression sintering at high temperatures to limit gap defects caused by high-temperature expansion, as well as chip sintering and welding, ceramic and metal high-density sintering. The maximum working temperature is 1100 ℃, suitable for sample preparation and material forming in the fields of precision ceramics, new materials, new energy, superconductivity, and other building materials.

Product Details

1200 ℃ hot press sintering furnace

Product description

MFLHP444-12 is a model with the highest temperature1200 ℃ hot press sintering furnaceCan provide precise pneumatic performanceConstant voltage controlThe maximum pressure can reach 1.5KN (replaceable cylinder power components can be used to increase the maximum pressure), which can be used for SOFC constant pressure compression sintering at high temperatures to limit gap defects caused by high-temperature expansion, as well as chip sintering and welding, ceramic and metal high-density sintering. The maximum working temperature is 1100 ℃, suitable for sample preparation and material forming in the fields of precision ceramics, new materials, new energy, superconductivity, and other building materials.

MFLHP444-12

Furnace size: 400 x 400 x 400mm

Rated temperature: 1200 ℃

[Power Supply Voltage] 380V/50Hz

Temperature control accuracy: ± 1 ℃

11200 ℃ hot press sintering furnaceProduct description

MFLHP444-12 is a model with the highest temperature1200 ℃ hot press sintering furnaceIt can provide precise pneumatic constant pressure control, with a maximum pressure of up to 4KN (replaceable cylinder power components can be used to increase the maximum pressure). It can be used for constant pressure bonding and sintering of SOFCs at high temperatures to limit gap defects caused by high-temperature expansion, as well as chip sintering and welding, high-density sintering of ceramics and metals, with a maximum working temperature of 1200 ℃. It is suitable for sample preparation and material forming in the fields of precision ceramics, new materials, new energy, superconductivity, and other building materials.

IIProduct Features

1. Integrated design optimizes furnace structure, saving space
2. The furnace material is made of high-purity alumina ceramic fiber material, which is not easily deformed at high temperatures and has excellent insulation performance
3. Double layered shell structure, equipped with air cooling system, with shell temperature at room temperature+10 ℃
4. Intelligent PID control instrument, 30 segment programmable program, capable of curve heating and setting temperature rate, constant temperature time control, automatic shutdown, etc
5. The instrument has high temperature control accuracy, with an accuracy of ± 0.1 ℃ within 1000 degrees; Over 1000 degrees ± 1 ℃
6. Equipped with door opening, power-off, over temperature alarm, leakage protection, over temperature protection
7. Optional large screen paperless recorder can be equipped to achieve real-time recording of temperature rise curves, and comes with a storage card for analyzing and printing experimental data

MFLHP444-12 Technical Parameters:

Device Model		MFLHP444-12
Performance	Temperature control range	Room temperature -1200 ℃
	Operating Temperature	≤1100℃
	Furnace volume	Size: 400 * 400 * 400mm (D * W * H)
	temperature control accuracy	Instrument accuracy: ＜ 1000 ± 0.1 ℃; ≥1000±1℃
	heating rate	Recommended temperature below 1000 degrees ≤ 10 ℃/min, with the fastest heating rate ≤ 30 ℃/min
	Cooling rate	Natural cooling above 700 ℃ ≤ 10 ℃/min
	Furnace temperature	The surface temperature of the furnace body is less than room temperature+20 (measured at 1000 ℃)
constitute become	Exterior of the box	Cold rolled steel plate, surface resistance coating
	furnace chamber	ceramic fiber
	sensor	Type K thermocouple
	heating element	High quality resistance alloy wire
	Furnace structure	Double layered shell structure with air cooling system
control manufacture device	Control method	PID control
	Set representation	7-inch touch screen instrument panel
	overtemperature protection	Integrated controller
	Operation function	Customized Run/Program Run (30 segment program temperature control)
	Additional features	Deviation correction, power outage compensation, lock key function
	timer	1 minute -99 hours 59 minutes and 999 hours 50 minutes digital setting, automatic operation, fast automatic stop
press 力 control manufacture	maximum pressure	1.5KN, (Optional other pressures)
	compression rod	Stainless steel pressure rod
	maximum stroke	100mm
safety	working environment	RT±5-40℃
	Usage guarantee	Open the door, power off, over temperature alarm, leakage protection, over temperature protection
rule grid	Overall dimensions	Reference size 80015002000mm（DWH)
	Weight and Capacity	350KG
	power supply voltage	380V50HZ
	input power	9KW
Factory List	hot press furnace	a
	High temperature gloves	Caston, a pair
	Crucible pliers	40CM one
	Pad bricks	A piece of corundum board
	Equipment Manual	a copy
	Instrument manual	a copy
	Warranty Card	a copy

For other sizes, please contact customer service

Please note
The heating rate is measured under no-load operation with a temperature set at 100 ° C below the maximum temperature.
The insulation power is measured under continuous working conditions.
The external dimensions are measured when closing the furnace door, including the size of the chimney.
The volume of the uniform temperature zone is less than the total volume of the furnace.

The content may be modified or corrected