1062 Baode Inductive Position Switch NPN Output 701515

1062 Baode Inductive Position Switch NPN Output 701515Baode Electric position feedback, also known as on/off position feedback, is widely used in Baode process valves.
Burkert Electric Position Feedback 1062 Type Characteristics:
-Easy to install, convertible or refurbishable
-Self adjusting release cam for 'closed' position
-LED on-site working status and position indication
-Compact IP65 casing
-Mechanical, inductive, or Namur limit switches
Burkert Electric Position Feedback 1062 Type Description:
The 1062 Baode Electric position feedback is installed on the valve. Remote transmission of Burkert valve position via electrical signal based on switch type:
-Open, close (with 1 limit switch type) or
-Open and close (with 2 switches or dual limit switch type)
LED provides position indication (except for sensing 2-wire system). Burkert mechanical or inductive switches are located inside a compact splash proof housing. The Burkert position indicator can rotate 360 ° and can be easily fixed to the valve.

1062 Baode Inductive Position Switch NPN Output 701515Technical Specifications
material
Body/Cover PA6/PC
Sealing (body/cover) EPDM
PG11 cable joint PA or PVDF
Guide piece made of brass or stainless steel
Core brass or stainless steel
Electrical connection terminal strip with PG11 cable connector, cable diameter 5-7 mm, large section 1 mm2
Environmental temperature -20 to+60 ° C (working and storage)
Relative humidity ≤ 85%, no condensation
Protection level IP65, when the connector is installed and tightened, and the cover of the electronic module is tightened
Certified limit switches comply with VDE, IEC, UL, CSA
EExi (intrinsic safety) induction limit switch complies with
II 2 GD EEx ia II C T6, T5 or T4-T1
Installation method: Install on the piston actuator, with an actuator size of Ø 40-125 mm
Installation orientation can be adjusted as needed
Mechanical limit switch (limit switch)
Number of limit switches 1 or 2
Output format conversion contact (open and/or close), silver or gold
Open, close or open/close status,
Power control light (LED): green, red, orange
Feedback on electrical position
Power supply 12-48 V DC/AC
110/250 V DC/AC
power consumption
(Limit switch)
< 35 mA (48 V DC)
< 8 mA (220 V AC)
Load current (limit switch) refer to the table on the next page
Voltage drop Max. 1 V DC
Inductive limit switch, 3-wire technology
Number of limit switches 1 or 2
Output form: normally open contact (PNP)
Status on, off, or on/off, power supply
Control lights (LED): green, red, orange
Electrical feedback
Power supply 10-30 V DC