100G high-speed flowmeter SPT N4U network traffic test

100G high-speed flowmeter SPT N4U network traffic test

SpirentSPT-N4U portable chassis is a compact chassis that supports Spiron's new 10GbE, 40GbE, and 100GbE modules. The following is a detailed introduction about the product:

1、 Characteristics and advantages

High density ports support:

Scalable to support every second640G cloud traffic.

Each chassis supports up to16 40G, 64 10G, or 4 100G Ethernet ports.

Protecting investments:

Compatible with existing SpironHyperMetrics and HyperMetrics Next modules.

No need to learn or master new user interfaces(UI) or API.

supportable400G Ethernet.

Measurement reliability and accuracy:

For large-scale testing and site to site latency/The best timing and synchronization for similar jitter environments.

Automatic calibration for Chassis to Chassis synchronization.

Innovative Design:

A built-in touch screen that displays real-time rack status and allows for management.

The guidance time is faster than previous systems3 times faster, firmware upgrade is 2 times faster.

2、 Specifications and Design

Chassis design and appearance:

EIA 19 "compatible hanger, 4RU height.

2 test module slots.

Side air flow (from left to right).

On site replaceable system hard drive.

Management and operation:

compatibleIPv4 and IPv6 manage networks.

Built in Android system touch screen.

Implemented through EthernetSSH terminal simulation.

Through external video interfaces andDirectly operate the USB port.

Time synchronization:

TCP and UDP pass through external timing receivers: PTP (IEEE 1588v2 Time Protocol), GPS (Global Positioning System), CDMA (Code Division Multiple Access), TIA/EIA – 95B, and NTP (Network Time Protocol).

Direct rack clustering and automatic synchronization cable calibration.

Indicator lights and controls:

System power on/Close the instruction.

Controller reset.

built-inLCD touch screen.

front panelLED: temperature, fan, management link, system and system power status; Test the power status of the module slot; Rack synchronization master/slave and status; Manage Ethernet connections, speed, and activity.

Power and environmental requirements:

STC-N4U-110 AC input port: 2 x 115V @ 12 A, or 2 x 230V @ 6A; 1 circuit for system and slot 1 operation, 1 circuit for slot 2 operation.

STC-N4U-220 AC input port: 1 x 230V @ 12A.

Peak power requirement: Full load rack is2kW。

Operating environment requirements:59 ° to 95 ° F (15 ° to 35 ° C), 20% to 80% relative humidity.

dissipate heat:6000 BTUs/h (ensuring 80% of the air conditioning's heat load).

interface

Front panel:4 x USB 2.0 (connected to keyboard or mouse), DVI-I/VGA D15 video interface (console), 1 PPS and 10 MHz BNCs and DB9 serial DCE (for ETR support), 10/100/1000M BASE-T RJ-45 Ethernet interface (for management), synchronous input/output RJ-45 (rack synchronous link), 1588 interface (unused), and system hard disk access panel.

Rear panel:C20 power interface.

3、 Application Fields

SpirentThe SPT-N4U network tester is widely used in the following fields:

Mobile and fixed infrastructure.

Cloud infrastructure.

Cloud applications.

Enterprise parks and wide area networks.

Data center.

4、 Price and Purchase

SpirentThe price of SPT-N4U network tester may vary due to factors such as suppliers, events, etc. Please consult relevant suppliers or visit for the latest information on specific prices.

5. Summary

SpirentThe SPT-N4U network tester frame has a wide range of application prospects in the field of network testing due to its high-density port support, investment protection, measurement reliability and accuracy, and innovative design. Whether considering performance or cost-effectiveness, it is a product worth recommending.

100G high-speed flowmeter SPT N4U network traffic test