1000W adjustable communication monitoring power supply

NegotiableUpdate on 12/03

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

1. This power supply has a portable chassis structure, which is beautiful and easy to carry

Product Details

1. This power supply has a portable chassis structure, which is beautiful and easy to carry.

2. The external input cable of the power supply should use the power cord provided by this device, and the output should use two cable wires not less than 25mm2; The power supply housing is fully enclosed, and the front panel has a power switch, a current internal and external control switch, a power output voltage and current digital display, and a working fault indicator light;

3. This power supply can use RS485 communication terminals to control the output current of the power supply. When controlling externally, switch the internal and external control switch to the external control position, and use the RS485 communication port to control the output current. The output voltage and current of the power supply can be read and monitored at any time through RS485 communication.

4. The internal heat dissipation duct of the power supply flows in and out.

5. It has overvoltage, overcurrent, short circuit, and overheating protection functions. When overvoltage or overcurrent faults occur inside the power system, the fault indicator light will light up.

Output voltage: 0-5V panel potentiometer continuously adjustable

Output current: 0-200A, panel internal potentiometer or RS485 communication external control mode continuously adjustable;

Rated output power: 1000W

Output voltage limit value: 5V

Output current limit value: 200A

Dimensions: Width x Height x Depth=220 x 150 x 320mm

Whole machine weight: approximately 9kg.