-
E-mail
alperm@163.com
- Phone
-
Address
103, 1st Floor, Building 5, No. 69 Fushi Road, Haidian District, Beijing
Product Categories
Beijing Jinkun Technology Co., Ltd
1-1000MH RF fiber optic transmission module
NegotiableUpdate on 12/29
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The 1-1000MHz RF fiber optic transmission module is a product designed by Beijing Jinkun Technology to transmit 1-1000MHz microwave signals through optical fibers. The product has the characteristics of small size, easy use, low cost, and high performance. Widely used for various signal transmission in the C-band, ranging and microwave signal conversion to optical signal processing. This section mainly covers fiber optic transmission products for RF and microwave signals. Includes modular and standard chassis products. The frequency covers 1MHz~40GHz and is mainly divided into several series based on different frequency bands and parameters. This product can be customized, welcome to consult technical solutions and specific prices!
Product Details
This section mainly covers fiber optic transmission products for RF and microwave signals. Includes modular and standard chassis products. The frequency covers 1MHz~40GHz and is mainly divided into several series based on different frequency bands and parameters.
1-1000MH RF fiber optic transmission moduleintroduction：
Advantages:
1. high bandwidth
2. Electromagnetic Interference Resistance
3. Optional different wavelengths of light 1310nm/1490nm/1550nm
4. Anti surge power protection, reliable power environment adaptability
5. Adaptive temperature compensation capability, controlling the stable output of the light source.
6. Compact and small volume
Application scenarios:
1. Radar antenna extended far away
2. Long distance RF signal transmission
3. Radio signal monitoring
4. Microwave signal transmission coverage
5. electronic countermeasure
6. Radar signal delay
1-1000MH RF fiber optic transmission moduleParameter table:
parameter name |
unit |
indicator value |
frequency range |
MHz |
1 – 1000 |
Link gain |
dB |
0 |
flatness |
dB |
≤ ± 3 |
Input 1dB compression point |
dBm |
≥ 0 |
VSWR |
NA |
≤ 2:1 |
Input RF signal |
dBm |
10 |
noise floor |
dBm/Hz |
<-120 |
Input/output impedance |
Ohm |
50 |
power supply method |
VDC |
6~12V |
power consumption |
W |
<2 (single module) |
Laser output wavelength |
nm |
1310/1550 |
Laser output power |
dBm |
>0dBm |
Detector operating wavelength |
nm |
1100~1650 |
Fiber optic connector type |
NA |
FC/APC interface |
RF connector type |
NA |
SMA |
size |
mm |
85 * 60 * 18 (excluding connectors) |
Operating Temperature |
℃ |
-45~65 |
Storage temperature |
℃ |
-55~85 |
Note:
1. All indicators are calibrated at+25 ℃, and temperature changes may cause slight changes in the parameters. Can be used normally within the temperature range indicated.
2. The module should maintain good heat dissipation during use.
1-1000MH RF fiber optic transmission moduleTypical test curve
Frequency response/gain curve:
1-1000MH RF fiber optic transmission moduleInstallation dimension drawing
ROF030M(0.1~3GHz)radio frequencyFiber optic transmission module0.1~3GHz
parameter name |
unit |
indicator value |
frequency range |
MHz |
100 – 3000 |
Link gain |
dB |
0 |
flatness |
dB |
≤ ± 3 |
input1dB compression point |
dBm |
≥ 0 |
VSWR |
NA |
≤ 2:1 |
Large input RF signal |
dBm |
10 |
noise floor |
dBm/Hz |
<-120 |
input/Output impedance |
Ohm |
50 |
power supply method |
VDC |
9V |
power consumption |
W |
<2 (single module) |
Laser output wavelength |
nm |
1310/1550 |
Laser output power |
dBm |
>0dBm |
Detector operating wavelength |
nm |
1100~1650 |
Fiber optic connector type |
NA |
FC/APC interface |
RF connector type |
NA |
SMA |
Size（Tx端） |
mm |
85 * 60 * 18 (excluding connectors) |
Size（Rx end) |
mm |
85*60*18 |
Operating Temperature |
℃ |
-45~65 |
Storage temperature |
℃ |
-45~65 |
All indicators are+At 25 ℃, the calibration index value may vary slightly due to temperature changes. Can be used normally within the temperature range indicated.
The module should maintain good heat dissipation during use.
0.1~3GHzRF fiber optic transmission moduleTypical test curve
frequency response/Gain curve:
Beijing Jinkun Technology Co., Ltd. is committed to providing customers with accurate, stable, and reliable optoelectronic products and solutions.
The company's technical solutions and products are aimed at RF microwave signal processing, satellite signal remote transmission, radar and electronic countermeasures, Applications in radio signal transmission, astronomical telescope array signal fiber optic transmission, radar distance simulation, positioning and navigation signal coverage transmission, etc.
Our main products include RF fiber optic transmission modules, microwave fiber optic transmission modules, fiber optic delay lines, microwave fiber optic delay lines, RF optical transceivers, microwave optical transceivers, optical mixers, optical bridges, GPS Beidou navigation signal fiber optic modules, RF fiber optic modules, etc.
The service industry and cooperative units include: Microwave and Radar Research Institute, Observatory, Satellite Launch and Engineering Center, Aerospace Research Institute, Shipbuilding Research Institute and Design Center, Chinese Academy of Sciences, and various universities and institutions.
Sincere service! Co create a win-win situation! Beijing Jinkun Technology Co., Ltd. looks forward to working with you!
Similar Product Recommend
